Yamaha RX-V1800 Manuel du propriétaire télécharger pdf (Page 94)

92 En

Customizing this unit (MANUAL SETUP)

When the speakers in Zone 2 or Zone 3 is

connected to the SP2 speaker terminals of this

unit directly:

Select “[SP2]”. See “Using the internal amplifiers of

this unit” on page 109 for details.

When you set “AMP” to “[SP2]” in “ZONE 2” or “ZONE

3” and the corresponding zone is turned on, no sound is

output from the surround speakers.

If the speakers in Zone 2 or Zone 3 are

connected to both the SP1 and SP2 speaker

terminals (for example, the speakers are

connected via the bi-amplifier connection, or

there are four speakers in a room) or if you

want to play back the same source in Zone 2

and Zone 3 simultaneously:

Select “BOTH”. See “Using the internal amplifiers of

this unit” on page 109 for details.

• When you set “AMP” to “BOTH” in “ZONE 2” or

“ZONE 3”, you can only set “AMP” to “EXT” in the other

zone setting.

• When you set “AMP” to “BOTH” in “ZONE 2” or

“ZONE 3” and the corresponding zone is turned on, no

sound is output from both the surround and surround back

speakers.

Zone 2/Zone 3 volume VOLUME

Use this feature to select whether this unit controls the

volume level of the audio signals output at the ZONE

OUT (ZONE 2 or ZONE 3) jacks when you set “AMP” to

“EXT” (see page 91).

Choices: VAR, FIX

When you want to control the volume level of

the selected zone on this unit:

Select “VAR”. You can adjust the ZONE OUT (ZONE

2 or ZONE 3) volume level simultaneously with

VOLUME +/– on the remote control.

When you want to control the volume level of

the selected zone on the external amplifier:

Select “FIX”. This unit fixes the ZONE OUT (ZONE 2

or ZONE 3) volume level to a standard line level.

Zone 2/Zone 3 maximum volume MAX VOL.

Use this feature to set the maximum volume level in the

Zone 2 or Zone 3.

Control range: –30.0 dB to +15.0 dB, +16.5 dB

Control step: 5.0 dB

The “MAX VOL.” setting takes priority over the “INIT. VOL.”

setting. For example, “INIT. VOL.” is set to –20.0 dB and then

“MAX VOL.” is set to –30.0 dB, the volume level is

automatically set to –30.0 dB when you turn on the power of this

unit next time.

Zone 2/Zone 3 initial volume INIT. VOL.

Use this feature to set the volume level of Zone 2 or Zone

3 when the power of Zone 2 or Zone 3 is turned on.

Choices: OFF, MUTE, –80.0 dB to +16.5 dB

Control step: 0.5 dB

The “MAX VOL.” setting takes priority over the “INIT. VOL.”

setting.

Note

Notes

Note

1 2 ... 89 90 91 92 93 94 95 96 97 98 99 ... 150 151

Commentaires sur ces manuels

Pas de commentaire

Yamaha RX-V1800 Manuel du propriétaire Page 94

Commentaires sur ces manuels

Produits connexes et manuels pour Récepteurs AV Yamaha RX-V1800