Yamaha RX-V1800 Manuel du propriétaire Page 91
- Page / 151
- Table des matières
- DEPANNAGE
- MARQUE LIVRES
Noté. / 5. Basé sur avis des utilisateurs
89 En
Customizing this unit (MANUAL SETUP)
ADVANCED
OPERATION
English
Front panel display scroll FL SCROLL
Use this feature to set the mode to display the iPod menu
(such as song title or channel name) in the front panel
display.
■ Video settings B)VIDEO SET
Video conversion VIDEO CONV.
Use this feature to set whether to convert the video signals
input at the VIDEO, S VIDEO, and COMPONENT
VIDEO jacks.
• This unit does not convert 480 line video signals and 576 line
video signals interchangeably.
• The analog component video signals with 480i (NTSC)/576i
(PAL) of resolution are converted into the S-video or composite
video signals and output at the S VIDEO MONITOR OUT and
VIDEO MONITOR OUT jacks.
• The analog component video signals with 1080p of resolution
are only output at the COMPONENT VIDEO MONITOR OUT
jacks.
• The converted video signals are only output at the MONITOR
OUT jacks. When recording a video source, you must make the
same type of video connections between each component.
• When composite video or S-video signals from a VCR are
converted into component video signals, the picture quality may
suffer depending on your VCR.
• Set “VIDEO CONV.” to “ON” to display the sound field
parameter display and short message display.
• Unconventional signals input at the composite video or S-video
jacks cannot be converted or may be output abnormally. In such
cases, set “VIDEO CONV.” to “OFF”.
Component interlace/progressive up-conversion
COMPONENT I/P
Use this feature to activate or deactivate the analog
interlace/progressive conversion of the analog video
signals input at the composite video, S-video and
component video jacks so that the analog video signals
deinterlaced from 480i (NTSC)/576i (PAL) to 480p/576p
are output at the COMPONENT MONITOR OUT jacks.
• The “COMPONENT I/P” parameter appears only when you set
“VIDEO CONV.” to “ON”.
• If your video monitor does not support analog video signals
with 480p/576p of resolution, the SET MENU items may not be
displayed on your video monitor when “COMPONENT I/P” is
set to “ON”. In such a case, set the “COMPONENT I/P”
parameter to “OFF”.
HDMI scaling HDMI SCALING
Use this feature to activate or deactivate the HDMI up-
scaling of the analog video signals input at the VIDEO, S
VIDEO and COMPONENT VIDEO jacks so that the up-
scaled video signals are output at the HDMI OUT jack.
This unit up-scales the video signals as follows:
• 480i (NTSC)/576i (PAL) → 480p/576p, 1080i, 720p or
1080p
• 480p/576p → 1080i, 720p or 1080p
This unit does not up-scale the analog component video signals
with 720p or1080i of resolution.
Choice Functions
CONT
Continuous mode.
Select this to display the operation status in the
front panel display in a continuous manner.
ONCE
Scroll-once mode.
Select this to display the operation status in the
front panel display by the first 14 alphanumeric
characters after scrolling all characters once.
Choice Functions
ON
Converts composite, S-video, and component
video signals interchangeably and up-converts
composite, S-video, and component video
signals to HDMI video signals.
OFF
Does not convert any signals.
Notes
[]/[]:
[p]/[[]:
[
p
B)VIDEO SET
VIDEO CONV.;;;;;;ON
COMPONENT I/P;;;OFF
HDMI SCALING;;;480p
HDMI ASPECT;;;THRGH
UP/DOWN
Select
.
Choice Functions
ON
Activates the analog interlace/progressive up-
conversion of the analog video signals.
OFF
Deactivates the analog interlace/progressive up-
conversion of the analog video signals.
Notes
Choice Functions
THROUGH
Does not up-scale any analog video signals.
480p (or
576p), 1080i,
720p, 1080p
Up-scales analog video signals to 480p or 576p,
1080i, 720p, or 1080p of resolution.
Note
- RX-V1800 1
- ■ For U.K. customers 2
- Contents 3
- About this manual 4
- Features 5
- Supplied accessories 6
- Getting started 7
- Step 1: Set up your speakers 9
- COMPONENT VIDEO 10
- For further connections 11
- ■ After using this unit 12
- Quick start guide 13
- Connections 14
- Placing speakers 15
- ■ 6.1-channel speaker layout 16
- ■ 5.1-channel speaker layout 16
- 1.8 m (6 ft) 17
- PREPARATION 19
- ■ Connecting the banana plug 21
- ■ Audio jacks 22
- ■ Video jacks 22
- Information on HDMI™ 23
- Audio and video signal flow 25
- MONITOR OUT 26
- Connecting other components 27
- ■ Using REMOTE IN/OUT jacks 33
- Connecting the FM and AM 34
- Connecting the power cable 34
- AC OUTLETS 34
- Setting the speaker impedance 35
- Turning this unit on and off 35
- Front panel display 36
- DIGITAL PLUS 37
- Using the remote control 38
- Using AUTO SETUP 39
- 5 Press 40
- 2 Press 42
- Playback 44
- Selecting audio input jacks 45
- (AUDIO SELECT) 45
- Selecting the MULTI CH INPUT 45
- Using your headphones 45
- Muting the audio output 46
- Displaying the input source 46
- Playing video sources in the 47
- Using the sleep timer 47
- Sound field programs 48
- ■ For audio music sources 49
- ■ For various sources 50
- ■ For visual sources of music 51
- ■ For movie sources 51
- ■ Stereo playback 52
- ■ Compressed Music Enhancer 52
- Enjoying unprocessed input 53
- Using audio features 54
- Adjusting the speaker level 55
- 2-channel stereo 55
- FM/AM tuning 56
- Automatic preset tuning 57
- Manual preset tuning 57
- Selecting preset stations 58
- Exchanging preset stations 59
- Frequency display 60
- Using the enhanced other 62
- Using iPod™ 63
- 1 Press 64
- Recording 65
- Advanced sound configurations 66
- REV.TIME 70
- REV.DELAY 70
- REV.LEVEL 70
- Selecting decoders 71
- ■ Decoder descriptions 72
- ■ Auto setup AUTO SETUP 74
- ■ Manual setup MANUAL SETUP 74
- Input menu 4 INPUT MENU 76
- Option menu 5 OPTION MENU 76
- A)DISPLAY SET 76
- ■ System memory SYSTEM MEMORY 77
- Using SET MENU 78
- 1 BASIC MENU 79
- ■ Test tone D)TEST TONE 82
- 2 VOLUME MENU 83
- 3 SOUND MENU 84
- ■ Low-frequency effect level 85
- (Lip sync) 86
- ■ Audio settings E)AUDIO SET 86
- 4 INPUT MENU 87
- 5 OPTION MENU 90
- ■ Video settings B)VIDEO SET 91
- ■ Memory guard C)MEMORY GUARD 92
- ■ Zone set E)ZONE SET 93
- SYSTEM MEMORY 96
- Using examples 97
- Set to SOURCE 100
- Setting remote control codes 101
- Remote control features 102
- Programming codes from other 103
- Changing source names in the 104
- Macro programming features 105
- ■ Default macro functions 106
- 2 Press the 107
- 4 Press 107
- Clearing configurations 108
- ■ Clearing a macro function 109
- ■ Using external amplifiers 110
- Controlling Zone 2 or Zone 3 111
- 3 Press 112
- (except Europe model) 114
- Advanced setup 115
- Troubleshooting 119
- ADDITIONAL 121
- INFORMATION 121
- DEVICE OVER 122
- HDCP ERROR 122
- Resolution 122
- ■ Remote control 123
- ■ AUTO SETUP 124
- Resetting the system 126
- Glossary 127
- ■ PCM (Linear PCM) 130
- ■ S-video signal 130
- ■ Frequency 132
- ■ Q factor 132
- Specifications 133
- Фронтальная панель 140
- Afstandsbediening/Пульт ДУ 141
- HD DVD PLAYER 144
- Blu-lay Disc player 144
- APPENDIX 147
- Printed in Malaysia 151
Produits connexes et manuels pour Récepteurs AV Yamaha RX-V1800
Récepteurs AV Yamaha YHT-S401 Manuel
(70 pages)
(70 pages)
Récepteurs AV Yamaha RX-V767 Manuel
(133 pages)
(133 pages)
(538 pages)
Récepteurs AV Yamaha HTR-4063 Manuel
(97 pages)
(97 pages)
(58 pages)
Récepteurs AV Yamaha RX-V650 Manuel
(91 pages)
(91 pages)
© 2020, manymanuals.fr. Tous droits réservés | 1.497 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Commentaires sur ces manuels