Yamaha RX-V1065 Manuel télécharger pdf (Page 67)

64 En

In the advanced setup menu, you can set basic operations

of this unit, such as on and off of a bi-amp connection, or

initialize user settings.

1 Set this unit to standby.

2 While holding down OSTRAIGHT on the

front panel, press KMAIN ZONE ON/OFF.

Keep holding down OSTRAIGHT until

“ADVANCED SETUP” appears on the front panel

display.

3 Rotate the NPROGRAM selector to select

the parameter you want to change.

The default setting are marked with “*”.

• Set values are placed in XXX of the following parameters on an

actual display screen.

SP IMP. -XXX

Selects output impedance of this unit according to

connected speakers. When you connect 4-ohm

speakers to the FRONT speaker terminals, set “SP

IMP.” to “6ΩMIN.”.

REMOTE ID -XXX

Sets a remote control ID. When using multiple

Yamaha AV receivers, you can operate them with a

single remote control by setting the receiver IDs to

the same setting.

SR PIN -XXX

Resets Parental lock cord when using SIRIUS

Satellite tuner.

BI AMP - XXX

Switches on and off of bi-amp connection of main

speakers. For bi-amp connection, see page 12.

SCENE IR -XXX

Selects whether or not to transmit the control signals

to an external component connected to the REMOTE

OUT jack on this unit when BD/DVD or CD SCENE

function is selected.

MON.CHK - XXXX

Adds upscaling limitation on output signals to a video

monitor connected to this unit via the HDMI OUT

jack.

INIT-XXXXXXXXX

Initializes various settings stored in this unit. You can

select an initialization method from the following.

DSP PARAM: All parameters of sound field

programs

VIDEO Video conversion settings (resolution/

aspect) in the Setup menu and the GUI

display position

ALL All

CANCEL Cancellation of initialization

4 Press OSTRAIGHT repeatedly to change

the selected parameter setting.

To change other settings, repeat steps 3 and 4.

5 Press KMAIN ZONE ON/OFF to set this

unit to standby.

The settings you made are reflected next time you

turn on this unit.

You can check the firmware of this unit and update the

firmware using the USB port on the front panel.

Select the following parameter in step 3 above.

FIRM UPDATE

Updates the firmware of this unit. To update the firmware,

select “FIRM UPDATE” and then press OSTRAIGHT.

Notes

• Do not use this feature unless you need to update the firmware.

• Be sure to read information supplied with updates before updating the

firmware.

VERXXX.XXX.XXX

Displays the firmware of this unit.

Two IDs are provided for the remote control of this unit. If

another Yamaha amplifier is in the same room, setting a

different remote control ID to this unit prevents unwanted

operation of the other amplifier.

“ID1” is set for both the main unit and remote control by

default. If you have changed the remote control ID, make

sure that you select the same ID for the main unit in the

the advanced setup menu.

1 Press oCODE SET on the remote control

using a pointed object such as the tip of a

ballpoint pen.

nTRANSMIT blinks twice.

2 Press iON SCREEN.

Advanced setup

Choices: 6ΩMIN, 8ΩMIN*

Choices: ID1*, ID2

Choices: RESET, CANCEL*

Choices: ON, OFF*

Choices: ON*, OFF

Choices: YES*, SKIP

ADVANCEDSETUP

Choices: DSP PARAM, VIDEO, ALL, CANCEL*

Updating the firmware

Setting a remote control ID

1 2 ... 62 63 64 65 66 67 68 69 70 71 72 ... 101 102

Commentaires sur ces manuels

Pas de commentaire

Yamaha RX-V1065 Manuel Page 67

Commentaires sur ces manuels

Produits connexes et manuels pour Récepteurs AV Yamaha RX-V1065