Yamaha DSP-AX1 Manuel du propriétaire Page 66
- Page / 256
- Table des matières
- DEPANNAGE
- MARQUE LIVRES
Noté. / 5. Basé sur avis des utilisateurs
64
Advanced
Operation
ZONE 2
You can make up a multi-room audio-video system with this unit. With this feature, you can set this unit to reproduce separate input sources
in the main room and second (Zone 2) room using the supplied remote control in the second room.
ONLY ANALOG SIGNALS ARE SENT TO THE SECOND ROOM. FOR ANY SOURCE YOU WISH TO LISTEN
TO IN THE SECOND ROOM, YOU MUST CONNECT THE ANALOG OUTPUT FROM THE SOURCE TO THE
CORRESPONDING ANALOG INPUT ON THIS UNIT.
Connections
To use the multi-room functions of this unit, you need the following additional equipment:
• An infrared signal receiver in the second room
• An infrared emitter in the main room
This emitter transmits the infrared signals from the remote control in the second room to the main room
(for example, to a CD player or LD player).
• An amplifier and speakers for the second room
• A video monitor for the second room
Notes:
• Since there are so many ways to connect and use this unit in a multi-room installation,
we recommend that you consult with a custom installation specialist for the Zone 2
connections which will best meet your requirements.
• Some Yamaha models are able to connect directly to the REMOTE 1 OUT jacks of
this unit. If you own these products, you may not need to use an infrared emitter. Up to
six Yamaha components can be connected as shown.
■ A sample of system configuration and connections
■ Special considerations when using DTS software
The DTS signal is a digital bitstream. Therefore, if you attempt to send the DTS signal to Zone 2, you will only be able to hear the digital
noise that could damage your loudspeakers.
Due to this characteristic of DTS encoded discs, the following considerations and adjustments need to be made.
For DTS encoded LDs or DVDs
Only 2-channel audio signals may be sent to Zone 2, as follows:
• Laser disc – Set your Laser Disc player’s left and right outputs to the analog sound track.
• DVD disc – Use the disc menu to set the DVD player’s mixed 2-channel left and right audio outputs to PCM or Dolby Digital.
For DTS encoded compact discs
DO NOT USE the Zone 2 feature with DTS encoded compact discs.
OUT OUT
Remote 1
OUTIN IN
This Unit
Main Room
DVD Player
(or other component)
Infrared emitter
This Unit
Second Room
Amplifier
Video monitor
Remote control
(in the Zone 2 mode)
Infrared signal receiver
REMOTE 1 OUT
VIDEO SIGNAL ZONE 2 OUT
REMOTE 1 IN
AUDIO SIGNAL ZONE 2 OUT
- OWNER’S MANUAL 1
- MODE D’EMPLOI 1
- BEDIENUNGSANLEITUNG 1
- For U.K. customers 2
- Contents 3
- Introduction 4
- Features 5
- Checking the Package Contents 7
- Front Panel 8
- Remote Control 10
- Controls and Functions 11
- Front Panel Display 12
- Rear Panel 13
- Preparations 14
- Speaker System Configurations 15
- Speaker Placement 16
- Connecting to Digital Jacks 17
- About the Video Jacks 17
- Connecting Audio Components 18
- ■ Connecting a Tape Deck 19
- Connecting Video Components 20
- ■ Connecting a VCR 21
- ■ Connecting a DVD Player 21
- ■ Connecting a Video Monitor 21
- Connecting Speakers 22
- SPLIT jacks using pin plugs 23
- ■ Connecting a Rear Subwoofer 24
- ■ Impedance Selector switch 24
- (SURROUND) 25
- Connecting Power Supply Cords 26
- OSD Modes 27
- Selecting the OSD Mode 27
- Speaker Settings 28
- Before You Begin 29
- DSP Test 31
- Basic Operation 32
- Power Control 33
- Selecting a Source 34
- Input Modes and Indications 35
- Basic Playback 36
- Advanced Operation 38
- SET MENU Items 39
- Operating the SET MENU 40
- 2. LOW FREQ. TEST 44
- 5. SP DELAY TIME 46
- 6. AUDIO DELAY 46
- 4. DTS SET 46
- 9. CINEMA EQ 48
- 13. MEMORY GUARD 50
- 15. INPUT MODE 50
- 16. INPUT RENAME 51
- 17. DIMMER 51
- 18. ZONE 2 SET 51
- Using the Remote Control 52
- Remote Control Features 53
- Each Component Control Area 54
- 5~10 cm (2 to 4 in.) 60
- Using the Macro Feature 61
- Connections 66
- Remote Control in ZONE 2 67
- Additional Information 68
- Understanding Sound Fields 69
- Recreating a Sound Field 69
- E/R (Early Reflection) 69
- Movie Theater Programs 72
- ■ Program Groups 7~9 73
- ■ Program Groups 10~12 73
- Changing Parameter Settings 75
- EFCT TRIM (Effect Trim) 76
- INIT. DLY (Initial Delay) 76
- S. DLY (Surround Delay) 77
- ROOM SIZE 77
- LIVENESS 78
- Appendix 80
- Troubleshooting 81
- Specifications 85
- Table des matières 87
- Particularités 89
- Face avant 92
- Commandes et fonctions 93
- Boîtier de télécommande 94
- Afficheur de la face avant 96
- Panneau arrière 97
- Remarque: 100
- Attention: 101
- R/CRPB/CBY 101
- Remarques: 103
- Raccordements 105
- Raccordement des enceintes 106
- Modes d’affichage sur l’écran 111
- Choix du mode d’affichage 111
- Réglages des enceintes 112
- Avant de commencer 113
- Essai Dolby Surround 114
- Essai DSP 115
- Opérations de base 116
- Commande de l’alimentation 117
- Choix de la source 118
- Modes d’entrée et indications 119
- Lecture standard 120
- Préparatifs 121
- Fonctionnement détaillé 122
- Paramètres de SET MENU 123
- Utilisation de SET MENU 124
- 6. AUDIO DELAY (Retard audio) 130
- 4. DTS SET (Réglage DTS) 130
- 17. DIMMER (luminosité) 135
- Une pression sur la touche % 137
- Une pression sur la touche fi 137
- Fonctionnement 138
- Français 139
- 5 à 10 cm 144
- Ces deux indications 144
- Emploi des macros 145
- ■ Création d’une macro 146
- ■ Enregistrement d’une macro 146
- V-AUX TAPE PHONO 147
- D-TV CBL/SAT TUNER MD CD 147
- VCR 1 VCR 2 VCR 3 LD DVD 147
- ON SCREEN 149
- SLEEP TEST 149
- Informations complémentaires 152
- Qu’est-ce qu’un champ sonore? 153
- Restitution d’un champ sonore 153
- E/R (Premières réflexions) 153
- Hi-Fi DSP-Sound Field Program 154
- CINEMA-DSP 155
- Corrections pour les films 156
- ■ Groupes 7 à 9 de correction 157
- INIT. DLY (Retard initial) 160
- S. DLY (Retard de l’ambiance) 161
- LIVENESS (Vivacité) 162
- Guide de dépannage 79 164
- Guide de dépannage 165
- Caractéristiques techniques 169
- Einleitung 172
- Merkmale 173
- Verwendung der Fernbedienung 175
- Fronttafel 176
- Fernbedienung 178
- Fronttafel-Display 180
- Rückwand 181
- Vorbereitungen 182
- ( ) 183
- Hinweis: 184
- Hinweise: 186
- Anschlüsse 191
- Bevor Sie beginnen 197
- Dolby Surround Test 198
- DSP-Test 199
- Grundlegende 200
- Bedienung 200
- Wahl einer Signalquelle 202
- Eingangsmodi und Anzeigen 203
- Vorsicht: 205
- Weiterführende 206
- PARAMETER 208
- SET MENU 208
- KeinKlein 209
- Groß Klein 209
- ■ Über den Testton 212
- ■ 3A. LFE LEVEL (LFE-Pegel) 213
- 4. DTS SET (DTS-Einstellung) 214
- 9. CINEMA EQ (Kino-Entzerrer) 216
- 12. 6.1/ES AUTO 217
- 17. DIMMER (Abblendung) 219
- Funktionen der Fernbedienung 221
- Zusätzliche Informationen 236
- Verstehen von Sound-Feldern 237
- HiFi DSP-Sound-Feld-Programm 238
- Filmtheater-Programme 240
- Programmtyp (Unterprogramm) 243
- Cursor Parameter 243
- ROOM SIZE (Raumgröße) 245
- Störungsbeseitigung 79 248
- Technische Daten 83 248
- Störungsbeseitigung 249
- Technische Daten 253
- V482940-1Printed in Japan 254
- Quick Reference Card 255
Produits connexes et manuels pour Récepteurs AV Yamaha DSP-AX1
Récepteurs AV Yamaha RX-V3800 Manuel
(459 pages)
(459 pages)
Récepteurs AV Yamaha RX-V765 Manuel
(156 pages)
(156 pages)
Récepteurs AV Yamaha RX-V1900 Manuel
(506 pages)
(506 pages)
Récepteurs AV Yamaha RX-A3010 Manuel
(157 pages)
(157 pages)
(441 pages)
(92 pages)
(18 pages)
Récepteurs AV Yamaha HTR-5650 Manuel
(66 pages)
(66 pages)
© 2020, manymanuals.fr. Tous droits réservés | 0.721 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Commentaires sur ces manuels