Yamaha CL3 Manuel du propriétaire télécharger pdf (Page 29)

Using the top panel (Channel Strip section)

Owner’s Manual

2. Press a Bank Select key to select the eight

channels (other than the DCA groups) that

you want to control in the OVERVIEW screen.

The Bank Select key will light. The lit status indicates

that the corresponding channels can be controlled in

the OVERVIEW screen and by the multifunction

knobs.

3. To release the channels or DCA groups that

were retained for the Centralogic section,

press the Bank Select key you operated in step

1 once again, and hold it down until the Bank

Select key LED changes from blinking to lit.

When the Bank Select key LED changes to being lit, its

channels or DCA groups will be assigned to both the

Centralogic section and the OVERVIEW screen.

Using the top panel

(Channel Strip section)

The Channel Strip section of the top panel enables you to

control the level, gain, pan, CUE, and other parameters for

the selected channels. The basic procedure is as follows:

1. Use the Bank Select keys located on the right

of the Channel Strip section to select the

channels or DCA groups that you want to

control.

Each Bank Select key holds a “Bank,” which bundles a

group of multiple channels.

“CUSTOM” Bank Select keys enable you to assign and

recall a bank with your own assortment of the

channels or DCA groups. These banks are called

“custom fader banks.” Since the custom fader banks

enable you to assign a combination of different types

of channels, you can control different types of

channels as a group.

2. Use the controls of the Channel Strip section.

Use the channel knob to adjust a parameter selected

by the [GAIN/PAN/ASSIGN] key.

Each channel’s display indicates the

currently-assigned channel information. For the

channel display information, access SETUP→USER

SETUP→PREFERENCE, then set NAME DISPLAY to

NAME ONLY or FULL FUNCTION.

Custom fader bank settings

Follow the procedure below to set up a custom fader bank for

control on the Channel Strip section.

1. Press the SETUP button located in the

function access area in the display.

2. Press the USER SETUP button in the upper left

of the SETUP screen.

3. Press the CUSTOM FADER tab near the

bottom of the USER SETUP screen.

The CUSTOM FADER BANK / MASTER FADER

screen will appear.

These controls affect

INPUT channels 1–8

in the OVERVIEW

screen.

These controls affect

DCA groups 1–8.

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 64 65

Commentaires sur ces manuels

Pas de commentaire

Yamaha CL3 Manuel du propriétaire Page 29

Commentaires sur ces manuels

Produits connexes et manuels pour Mélangeurs audio Yamaha CL3