Yamaha YRS-1100 Manuel du propriétaire télécharger pdf (Page 16)

Initial settings

14 En

■ AUTO SETUP via setup menu

Place the IntelliBeam microphone and

press SETUP key.

Press U / V to select “AUTO SETUP”

and then press ENTER key.

Press U / V to select one of the items

below and then press ENTER key.

Select Item:

“BEAM+SOUND OPTIMIZE” (Beam optimization

and sound optimization)

It is recommended that you should select this optimization

feature, if you make settings for the first time.

This menu takes about three minutes.

“BEAM OPTIMIZE ONLY”(Beam optimization

only)

Use to optimize the beam angle so that the parameter best

matches your listening environment.

This menu takes about one minute.

“SOUND OPTIMIZE ONLY”(Sound optimization

only)

Use to optimize the beam delay, volume, and quality so

that the parameters best match your listening environment.

You must optimize the beam angle with “BEAM

OPTIMIZE ONLY” before starting “SOUND OPTIMIZE

ONLY”. It is recommended that you should select this

optimization feature in the following cases:

• If you have opened or closed the curtains in your

listening room before using this unit

• If you have manually set the beam angle.

This menu takes about two minutes.

Connect the IntelliBeam microphone to

this unit after “AUTO SETUP

(PREPARATION & CHECK)” screen is

displayed.

For the details on installing and connecting IntelliBeam

microphone, refer to “Installing the IntelliBeam

microphone (☞p. 11)”.

Perform the step 4, 5 and 6 of “Using

AUTO SETUP (IntelliBeam) (☞p. 13)”.

After setup is completed, remove the

IntelliBeam microphone.

The best setting may not be done if you are in the room. Prepare to

leave the room in 10 seconds after pressing ENTER in step 4.

Note

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 115 116

Commentaires sur ces manuels

Pas de commentaire

Yamaha YRS-1100 Manuel du propriétaire Page 16

Commentaires sur ces manuels

Produits connexes et manuels pour Récepteur Yamaha YRS-1100