Yamaha YRS-1100 Manuel du propriétaire télécharger pdf (Page 55)

53 En

PREPARATION

CONNECTION/

INITIAL SETTINGS PLAYBACK SETTINGS

TROUBLESHOOTING

ABOUT THIS UNIT English

Using the supplied demonstration DVD

By playing back the supplied demonstration DVD, you can check the digital signals being input properly from the Blu-ray disc player

through the digital connection (HDMI, optical, or coaxial) and experience this unit’s multi-channel surround sound.

If “Dolby D” does not appear in the front panel display in step 6,

check the followings.

Is the Blu-ray disc player connected to this unit using a

digital cable?

You need to connect these components with digital cables

(HDMI cable, optical cable, or coaxial cable) to playback 5.1-

channel contents such as Dolby Digital.

Is an input source selected correctly on this unit?

Check that which input jack of this unit the Blu-ray disc player is

connected to. Then check whether the name of input source

displayed in the front panel display of this unit is the same as that

of the input jack used.

If you connect the Blu-ray disc player to the HDMI IN 1 jack, when you

select HDMI 1 as the input source, “HDMI 1” should be displayed.

Is digital audio output set correctly on the Blu-ray disc

player?

HDMI connection: Set the digital audio output setting to “Auto”

or “Bitstream”.

Digital audio connection: Enable “Dolby Digital/DTS” or

“Bitstream”.

Refer to the owner’s manual supplied with the Blu-ray disc player for the

settings.

Playing back the demonstration DVD

Select input sources both on this unit and

your TV so that audio signal of DVD is

input to this unit and video signal is input

to your TV.

HDMI connection: On your TV, select this unit as the

input source. On this unit, select the Blu-ray disc player as

the input source.

Audio/Video connection: Select the Blu-ray disc player as

the input source on both of your TV and this unit.

Load the demonstration DVD.

Select “Rain and Thunder” from the DVD

menu.

Display the DVD menu screen by using the remote

control of the Blu-ray disc player and then playback “Rain

and Thunder”.

Press OPTION key on the remote control

to display the option menu.

Press U/V key to select “Signal Info”, and

then press ENTER key.

Check that “Dolby D” appears in the front

panel display.

If the “Dolby D” does not appear, the digital audio signal

of the demonstration DVD is not input to this unit. Check

the connections and settings of the Blu-ray disc player.

Press V key and check that “3/2/0.1”

appears in the front panel display.

Experience the Dolby Digital 5.1ch

surround sound.

The sound of rain and buzzing of cicadas are heard from

all around the listening position.

Dolby D

3/2/0.1

“Dolby D” does not appear when the Blu-ray disc player is not

playing back the demonstration DVD and the DVD menu screen is

displayed.

Note

Enjoy the surround sound in surround playback mode (☞p. 21).

If “Dolby D” does not appear

1 2 ... 50 51 52 53 54 55 56 57 58 59 60 ... 115 116

Commentaires sur ces manuels

Pas de commentaire

Yamaha YRS-1100 Manuel du propriétaire Page 55

Commentaires sur ces manuels

Produits connexes et manuels pour Récepteur Yamaha YRS-1100