Yamaha DTX Manuel du propriétaire Page 52

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 174
  • Table des matières
  • DEPANNAGE
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 51
48
Feature Reference Drum Kit Trigger Edit Mode
24 FC Sens (hi-hat control sensitivity)
This adjusts the sensitivity of the foot controller
connected to the H.HAT CONTROL jack on the
rear panel.
Rotate the Data Scroll Wheel or use the +1/YES
and -1/NO buttons to set the sensitivity. The
larger the value, the more sensitive the response
of the internal tone generator.
MISC.
SNARE
KICK
CYMBAL
FC Sens
= 8
Settings:
1 to 16
25 HH Ctrl (hi-hat control)
This sets the input level to execute the hi-hat
effect using the foot switch or foot controller
only when the function on the 19th page (FS
function display) or the 22nd page (hi-hat
control function display) is set to HH ctrl (hi-
hat control).
Rotate the Data Scroll Wheel or use the +1/YES
and -1/NO buttons to select the input level.
MISC.
SNARE
KICK
CYMBAL
HH Ctrl
input= 8
Settings:
INPUT number: 1 to 12
26 In 9 to 10 (input 9 to 10)
This is an additional feature of DTX version 2.0.
Please refer to the System Upgrade Information
Guide (included in this package).
27 In 11 to 12 (input 11 to 12)
This is an additional feature of DTX version 2.0.
Please refer to the System Upgrade Information
Guide (included in this package).
28 Copy INP (copy input)
This copies the input data settings of any
drumkit input currently being edited to another
drumkit input number. This is convenient in
creating similar input settings.
! Move the cursor to the Input Copy Source
focus area and rotate the Data Scroll Wheel
or use the +1/YES and -1/NO buttons to
choose the (source) input jack number
between 1 to 12.
You can also enable the Learn mode (P.115)
to automatically select the (source) input
jack number by hitting each pad or drum.
" Move the cursor to the Drum Kit Copy
Destination focus area and rotate the Data
Scroll Wheel or use the +1/YES and -1/NO
buttons to select the drum kit (destination)
input jack number.
MISC.
SNARE
KICK
CYMBAL
Copy INP
toD 2I 1
INPUT
Drum kit copy
destination
Input copy source
Settings:
Drum kit copy destination: D1 to D32, --(current
drum kit)
Input copy source: 1 to 12
# Press the START/STOP button and the LCD
will display Sure? y/n.
MISC.
SNARE
KICK
CYMBAL
INPUT
Copy INP
Sure?y/n
$ Press the +1/YES button to copy. complete
will flash on the LCD momentarily and the
display will return to the original display.
Press the -1/NO button to cancel.
Vue de la page 51
1 2 ... 47 48 49 50 51 52 53 54 55 56 57 ... 173 174

Commentaires sur ces manuels

Pas de commentaire