Yamaha DTX Manuel du propriétaire télécharger pdf (Page 44)

Feature Reference — Drum Kit Trigger Edit Mode

10 Spec Rej (specific rejection)

This function prevents cross talk (mixed

sounds) among the pads or drums connected to

specific input jacks. When a sound is triggered

shortly after a specific sound, the sound will not

be delivered if the level is lower than the level

set here. Set the level for each input jack

number.

! Move the cursor to the INPUT focus area

and rotate the Data Scroll Wheel or use the

+1/YES and -1/NO buttons to choose the

input jack number.

You can also enable the Learn mode (P.115)

to automatically select the input jack number

by hitting each pad or drum.

" Move the cursor to the specific input focus

area and rotate the Data Scroll Wheel or use

the +1/YES and -1/NO buttons to select the

input jack number.

# Move the cursor to the level focus area and

rotate the Data Scroll Wheel or use the +1/

YES and -1/NO buttons to set the level.

$ Repeat steps !, ", and # to select and set

the level of each input jack number.

MISC.

SNARE

KICK

CYMBAL

INPUT

Spec Rej

Specific input

focus area

Level focus area

from 1=0

Settings:

The following parameters can be set for input jack numbers

1 to 12.

Specific input: 1 to 12

0 (rejection function disabled) to 9

11 Note= (note numbers settings)

This function assigns note numbers to each

input. You can assign up to 7 MIDI note

numbers to each input jack. When a trigger

signal is sent to the input jack, the MIDI note

number assigned to that input jack is sent to the

internal tone generator, which delivers the

sound assigned to that number. This enables

you to play 1 pad and deliver multiple (up to 5)

drum sounds. The order of the 5 drum sounds

to sound can be designated.

By setting the Key On Mode (P.43), the sounds

can be delivered simultaneously, or one by one.

This feature can be applied to a wide range of

ideas and enhance the efficiency of your

performance.

The MIDI note number can also be transmitted

from the MIDI OUT jack on the rear panel of

the DTX to an external device. This means you

can play a pad and control an external MIDI

tone generator or sequencer.

Various drum and percussion sounds can be

assigned to each note number in Drum Kit

Voice Edit mode (P.50). Refer to P.41 for

further information on note numbers.

Move the cursor to the INPUT focus area and

rotate the Data Scroll Wheel or use the +1/YES

and -1/NO buttons to choose the input jack

number.

You can also enable the Learn mode (P.115) to

automatically select the input jack number by

hitting each pad or drum.

" Move the cursor to the Note=*** focus area and

rotate the Data Scroll Wheel or use the +1/YES

and -1/NO buttons to select the parameter (type)

from the 5 numbers (1st to 5th), mut (mute), and

rim for a MIDI note number.

Select mut (mute) when designating the note number for

the sound delivered when the pad is played while holding down

the pad rim switch. The other 5 sounds will be muted when the

pad is played while holding down the rim switch.

Select rim to set the note number of the sound delivered

when the rim is played.

when or an input number is assigned to a hi-hat

controller (the default setting is input 8), the focus area will

display the following 5 parameters.

Opn:

Delivered when the pad is played with the hi-hat opened

Cls:

Hi-hat closed

FCl:

Foot closed

FOp:

Foot opened

rim:

Pad rim is held

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 173 174

Commentaires sur ces manuels

Pas de commentaire

Yamaha DTX Manuel du propriétaire Page 44

Commentaires sur ces manuels

Produits connexes et manuels pour Instruments de musique Yamaha DTX