Yamaha Tyros5 Manuel du propriétaire télécharger pdf (Page 38)

38 Tyros5 Reference Manual

3 Replace the Source Pattern of the specific channel with that of another Style.

3-1

Select the desired channel to be replaced via the [A]–[D] and [F]–[I] buttons.

3-2 Press the same button of the selected channel to call up the Style Selection display.

3-3 Select the desired Style, then press the [EXIT] button to return to the original display.

3-4 Select the Section and Channel of the selected Style via the [2 ]–[5 ] buttons.

3-5 Confirm the sound with the newly assigned Source Pattern via the [6 ]–[7 ] buttons.

For details, see “Playing the Style During Style Assembly” below.

4 As desired, execute the same operations for another channel.

Playing the Style During Style Assembly

While you are assembling a Style, you can play back the Style and select the method of playback. Use the

[6 ]/[7 ] (PLAY TYPE) buttons in the Style Assembly display to select the playback method.

• SOLO: Plays back the selected channel in the ASSEMBLY Page. Any channels set to REC in the REC

CHANNEL display on the BASIC Page are played back simultaneously.

• ON: Plays back the selected channel in the ASSEMBLY Page. Any channels set to other than OFF in the

REC CHANNEL display on the BASIC Page are played back simultaneously.

• OFF: Mutes the selected channel in the ASSEMBLY Page.

3-5

3-3

3-1,

3-2

3-4

[A]–[D],

[F]–[I]

buttons

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 151 152

Pas de commentaire

Yamaha Tyros5 Manuel du propriétaire Page 38