Yamaha CP33 Manuel du propriétaire télécharger pdf (Page 39)

Detailed Settings

CP33 Owner’s Manual

Reference

F6. Click Volume

Use this function to adjust the Click volume.

• Setting range: 1 – 20

• Default setting: 10

F7. MIDI Functions

This allows you to make detailed adjustments to the MIDI

settings.

For more information about MIDI, see the "About MIDI"

section (page 42).

MIDI Transmit Channel Selection

In any MIDI control setup, the MIDI channels of the

transmitting and receiving devices must be matched for

proper data transfer. This parameter enables you to specify

the channel on which the CP33 transmits MIDI data.

• Setting range: 1 – 16, OFF (not transmitted)

• Default setting: 1

n In Dual, Voice 1 data is transmitted on its speciﬁed

channel. In Split, right Voice data is transmitted on its

speciﬁed channel. In Dual, Voice 2 data is transmitted on

the next greater channel number relative to the speciﬁed

channel. In Split, left Voice data is transmitted on the

next greater channel number relative to the speciﬁed

channel. In either case, no data is transmitted if the

transmit channel is set to "OFF."

n While the Master mode is turned on, "*03 MIDI

Transmit Channel" parameter in the Master Edit menu

will be enabled for MIDI channel assignments.

MIDI Receive Channel Selection

In any MIDI control setup, the MIDI channels of the

transmitting and receiving devices must be matched for

proper data transfer. This parameter enables you to specify

the channel on which the CP33 receives MIDI data.

• Setting range: ALL, 1&2, 1 – 16

• Default setting: ALL

ALL: "Multi-timbre" Receive. This allows simultaneous

reception of different parts on all 16 MIDI channels,

enabling the CP33 to play multi-channel Song data

received from a music computer or sequencer.

1&2: "1&2" Receive. This allows simultaneous

reception on channels 1 and 2 only, enabling the CP33

to play 1 and 2 channel Song data received from a music

computer or sequencer.

Local Control ON/OFF

"Local Control" refers to the fact that, normally, the CP33

keyboard controls its internal tone generator, allowing the

internal Voices to be played directly from the keyboard.

This situation is "Local Control On," since the internal

tone generator is controlled locally by its own keyboard.

Local Control can be turned OFF, however, so that the

CP33 keyboard does not play the internal Voices, but the

appropriate MIDI information is still transmitted via the

MIDI OUT terminal when notes are played on the

keyboard.

At the same time, the internal tone generator responds to

MIDI information received via the MIDI IN terminal.

• Setting range: ON/OFF

• Default setting: ON

SHORTCUT

You can jump directly to the Click functions by pressing the

[TEMPO/FUNCTION] button while holding the [CLICK]

button.

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 63 64

Commentaires sur ces manuels

Pas de commentaire

Yamaha CP33 Manuel du propriétaire Page 39

Commentaires sur ces manuels

Produits connexes et manuels pour Pianos numériques Yamaha CP33