Yamaha CP33 Manuel du propriétaire télécharger pdf (Page 17)

Playing Voices

CP33 Owner’s Manual

Reference

[BRILLIANCE]

This button enables you to change the brightness of the selected Voice for your keyboard performance. The

following three types are available.

• BRIGHT . . . . . . .Bright tone

• NORMAL . . . . . .Standard tone

• MELLOW . . . . . .Soft and mellow tone

To change the setting, press the [BRILLIANCE] button repeatedly until the indicator corresponding to the

desired type lights (the indicator lights in sequence each time you press the [BRILLIANCE] button). Brilliance

can be selected among three types.

• Default setting: Normal

[REVERB]

This control enables you to select various digital reverb effects for adding extra depth and expression to the

sound and creating a realistic acoustic ambience.

• OFF . . . . . . . . . . .When no reverb effect is selected, no REVERB indicator is lit.

• ROOM . . . . . . . . .This setting adds a continuous reverb effect to the sound—similar to the acoustic

reverberation you would hear in a room.

• HALL 1 . . . . . . . .For a "bigger" reverb sound, use the HALL 1 setting. This effect simulates the natural

reverberation of a small-size concert hall.

• HALL 2 . . . . . . . .For a truly spacious reverb sound, use the HALL 2 setting. This effect simulates the

natural reverberation of a large concert hall.

• STAGE . . . . . . . . .Simulates the reverb of a stage environment.

Pressing the [REVERB] button repeatedly toggles the reverb on and off.

The indicators light in sequence each time the [REVERB] button is pressed. When all indicators are off, no

effect is produced.

• Default settings: The default reverb type (including OFF) and depth settings are different for each voice.

Adjusting Reverb Depth

Adjust the reverb depth for the selected voice by using the [NO/–] and [YES/+] buttons while holding the

[REVERB] button. Default depth settings are different for each Voice.

The depth range is from 0 (no effect) through 20 (maximum reverb depth). The current depth setting appears

on the display while the [REVERB] button is held.

n Releasing the [REVERB] button changes the reverb type. If you hold down the [REVERB] button to change the

depth, the reverb type will not be changed.

BRILLIANCE REVERB EFFECT TOUCH

BRIGHT

NORMAL

MELLOW

HALL 1

HALL 2

STAGE

PHASER

TREMOLO

CHORUS

ROTARY SP

HARD

MEDIUM

ROOM

SOFT

PANEL

LOCK