Yamaha CP33 Manuel du propriétaire Page 36

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 64
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 35
Detailed Settings
CP33 Owner’s Manual
36
Reference
F3. Dual Functions
You can set various parameters for Dual (page 19) to
optimize the settings for the songs you play, such as tuning
the pitches of the two Voices.
Dual function settings are set individually for each Voice
combination.
If Dual is not engaged, will appear instead of
and you will be unable to select the Dual functions. If this
happens, press two Voice buttons at the same time to
engage Dual.
Dual Detune
• Setting range: -10 – 0 – 10
(With positive values, the pitch of Voice
1 is raised and the pitch of Voice 2 is
lowered. With negative values, the pitch
of Voice 1 is lowered and the pitch of
Voice 2 is raised.)
n The available setting range is wider in the lower range
(±60 cents for A-1), and narrower in the higher range (±5
cents for C7). (100 cents equal one semitone.)
• Default setting: Different for each Voice combination.
Detune Voice 1 and Voice 2 for Dual to create a thicker
sound.
Voice 1 Octave Shift
Voice 2 Octave Shift
• Setting range: -1, 0, 1
• Default setting: Different for each voice combination.
You can shift the pitch up and down in octave steps for
Voice 1 and Voice 2 independently. Depending on which
voices you combine in Dual, the combination may sound
better if one of the voices is shifted up or down an octave.
Voice 1 Effect Depth
Voice 2 Effect Depth
• Setting range: 0 – 20
• Default setting: Different for each voice combination.
These functions make it possible to individually set the
depth of the effect for Voices 1 and 2 for Dual. (The effect
depth settings cannot be changed unless the [EFFECT] is
ON. Function must be exited before the [EFFECT] can be
turned ON.)
•"Voice 1" and "Voice 2" are explained on page 20.
Reset
This function resets all Dual functions to their default
values. Press the [YES/+] button to reset the values.
SHORTCUT:
You can jump directly to the Dual functions by pressing the
[TEMPO/FUNCTION] button while holding the two Dual Voice
buttons.
Vue de la page 35
1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 63 64

Commentaires sur ces manuels

Pas de commentaire