Yamaha RX-A2000 Manuel du propriétaire télécharger pdf (Page 124)

SETUP

En 124

This unit supports the HDMI Control function, which allows you to

operate external components via HDMI. If devices that support

HDMI Control (e.g., Panasonic VIERA Link-compatible TVs,

DVD/Blu-ray Disc players, etc.) are connected J1, remote

controls for those devices can be used to perform the following

operations:

– Power synchronization (on/standby)

– Volume control, including Mute

– Changing the volume of the audio output signal device (either the

TV or this unit)

Connect the TV that supports the HDMI Control

function to this unit’s HDMI output jack.

Connect the DVD/BD player that supports the HDMI

Control function to this unit’s HDMI input jack.

Turn on the TV and this unit.

Refer to the TV’s instruction manual on how to operate external

components.

Set the TV and this unit’s HDMI Control function to

“On.”

Turn the TV off.

Other synchronized HDMI Control devices are turned off with the

TV. If they are not synchronized, unplug the power cable of the

TV.

Turn the TV on.

Confirm that this unit has turned on in conjunction with the TV. If

it is still off, turn it on manually.

Change the TV’s input setting to the input jack that

is connected to this unit (e.g., AV1).

If DVD/BD player that supports the HDMI Control

function are connected to this unit, turn them on.

Confirm that this unit is properly synchronized with

the TV through the following operations by using the

TV remote control.

• Power On/Off

• Volume Control

• Switching between audio output devices

Using the HDMI Control function

NOTE

The following is an example of how to connect this unit, a TV,

and a DVD/BD player. Follow the instructions in your TV and

DVD/BD player manuals, as well as the ones written below.

– Set the TV’s HDMI Control function to “On”

– Follow the AV amplifier connection instructions, and connect

this unit to the TV

HDMI

Control signal

(such as volume control)

Remote control of TV

This unit

HDMI connection

This unit Confirm that “HDMI Control” is set to “On”

(☞p. 100) and select the HDMI OUT jack connected

to the TV in “Control Select” (☞p. 100). J2

TV and DVD/BD

player

Check the instruction manuals for those devices.

This unit Confirm that the input source for the DVD/BD players

has been selected. If a different input source has been

selected, change it manually.

TV and DVD/BD

player

Confirm that the video signal from the player is being

properly received by the TV.

Operations 1-8 will not be required more than twice. However,

perform operations 1-8 again when switching the HDMI OUT

jack using Control Select.

If this unit is not synchronized to the TV’s power operations,

check that the HDMI Control function is set to “On” for both

devices.

If they will not properly synchronize, unplugging and re-

plugging the power cable of this unit and the TV may solve the

problem.

1 : We recommend that you use TVs and DVD/BD players from the same

manufacturer whenever possible.

2 : The default setting for the HDMI Control function is “Off.”

1 2 ... 119 120 121 122 123 124 125 126 127 128 129 ... 157 158

Commentaires sur ces manuels

Pas de commentaire

Yamaha RX-A2000 Manuel du propriétaire Page 124

Commentaires sur ces manuels

Produits connexes et manuels pour Récepteurs AV Yamaha RX-A2000