8-25
–+
ELEC
E
STARTER MOTOR
SERVICE POINTS
Pinion removal
1. Remove:
● Clip 1
NOTE:
Using a pry-bar, pry off the clip.
Pinion inspection
1. Inspect:
● Pinion teeth
Wear/Damage → Replace.
2. Check:
● Clutch movement
Damage → Replace.
NOTE:
Rotate the pinion clockwise, and check that
it freely. Also try to rotate the pinion coun-
terclockwise and confirm that it locks.
Armature inspection
1. Inspect:
● Commutator
Dirty → Clean with #600 abrasive
paper.
2. Measure:
● Commutator diameter
Out of specification → Replace.
Commutator diameter:
Limit 29 mm (1.14 in)
Commentaires sur ces manuels