Yamaha RX-V3800 Manuel Page 97
- Page / 169
- Table des matières
- DEPANNAGE
- MARQUE LIVRES
Noté. / 5. Basé sur avis des utilisateurs
93 En
Graphical user interface (GUI) screen
ADVANCED
OPERATION
English
Low-frequency signals output
*1 Output(s) the low-frequency signals of the front channels and
other speakers set to “Small” or “None”.
*2 Always output the low-frequency signals of the front
channels.
*3 Output the low-frequency signals if the speakers are set to
“Large”.
*4 Outputs the low-frequency signals of the speakers set to
“Small” or “None”.
Bass Cross Over (Bass cross over)
Use this feature to select the crossover frequency of all the
speakers set to “Small” or to “None” in “Speaker Set” (see
pages 91 and 92). All frequencies below the selected
frequency will be sent to the subwoofer or to the speakers
set to “Large” in “Speaker Set” (see pages 91 and 92).
Choices: 40Hz, 60Hz, 80Hz, 90Hz, 100Hz, 110Hz,
120Hz, 160Hz, 200Hz
y
If your subwoofer can adjust the output volume and the crossover
frequency, set the volume to about half way (or slightly less) and
set the crossover frequency to the maximum.
SWFR Phase (Subwoofer phase)
Use this feature to switch the phase of your subwoofer if
bass sounds are lacking or unclear.
PR/SB Priority
(Presence/surround back speaker priority)
Use this feature to prioritize either the presence or the
surround back speakers when playing back 2-channel
audio sources using the sound field programs.
When the CINEMA DSP 3D mode is active (see page 50), this
unit always prioritize the presence speakers.
■ Speaker Distance (Speaker distance)
Use this feature to manually adjust the distance of each
speaker and the delay applied to the respective channel.
Ideally, each speaker should be the same distance from the
main listening position. However, this is not possible in most
home situations. Thus, a certain amount of delay must be
applied to the sound from each speaker so that all sounds will
arrive at the listening position at the same time.
Speaker distances
Control range: 0.30 to 24.00 m (1.0 to 80.0 ft)
Initial setting:
Front L/Front R/Subwoofer/Presence L/Presence R/
Subwoofer: 3.00 m (10.0 ft)
CENTER: 2.60 m (8.5 ft)
Surround L/Surround R/Surround Back L/
Surround Back R: 2.40 m (8.0 ft)
Control step: 0.1 m (0.5 ft)
y
If your subwoofer can adjust the output volume and the crossover
frequency, set the volume to about half way (or slightly less) and
set the crossover frequency to the maximum.
• The available speaker channels differ depending on the setting
of the speakers.
• If you are only using one surround back speaker, connect it to
the SURROUND BACK SINGLE jack, and adjust the distance
in “Surround Back L”.
Choice
Subwoofer and speakers
Subwoofer
Front
speakers
Other
speakers
Both
*1 *2 *3
SWFR
*4 *3 *3
Front
No output *1 *3
Choice Functions
Normal
(normal)
Does not change the phase of your subwoofer.
Reverse
(reverse)
Sets the phase of your subwoofer to reverse.
Choice Functions
Presence
Uses the presence speakers.
Surround
Back
Uses the surround back speakers.
Note
Speaker Distance Adjusted speaker
Front L
Front left speaker
Front R
Front right speaker
Center
Center speaker
Surround L
Surround left speaker
Surround R
Surround right speaker
Surround Back L
Surround back left speaker
Surround Back R
Surround back right speaker
Presence L
Presence left speaker
Presence R
Presence right speaker
Subwoofer
Subwoofer
Notes
Test Tone
Speaker Set
Speaker Distance
Speaker Level
Subwoofer
Unit
Front L
Front R
Center
- RX-V3800 1
- Important safety instructions 2
- Caution-ii En 3
- Caution-iii En 4
- Contents 5
- About this manual 6
- Features 7
- Supplied accessories 8
- Getting started 9
- Quick start guide 10
- Indoor FM antenna 13
- AM loop antenna 13
- Open the lever 13
- Close the lever 13
- ■ After using this unit 14
- Connections 16
- Placing speakers 17
- ■ 6.1-channel speaker layout 18
- ■ 5.1-channel speaker layout 18
- Connecting speakers 19
- SPEAKERS 20
- Using presence speakers 21
- ■ Connecting the banana plug 23
- B, PR) video signals 24
- Information on HDMI™ 25
- Audio and video signal flow 26
- MONITOR OUT 27
- BD/HD DVD 28
- ■ Connecting a DVD player 29
- ■ Connecting a set-top box 30
- ■ Connecting audio components 31
- MULTI CH INPUT 33
- ■ Using REMOTE IN/OUT jacks 34
- Connecting the network 35
- Connecting the FM and AM 36
- Connecting the power cable 36
- Turning this unit on and off 37
- Using the remote control 38
- Front panel display 39
- DIGITAL PLUS 40
- Using the automatic setup 41
- (Auto Setup) 41
- Exit Detail 42
- Measurement Over 42
- Successfully 42
- Warning messages 43
- Playback 45
- Selecting audio input jacks 46
- (AUDIO SELECT) 46
- Selecting the MULTI CH INPUT 46
- Using your headphones 46
- Muting the audio output 47
- Playing video sources in the 47
- Using the sleep timer 47
- ■ Items in GUI screen 48
- Sound field programs 49
- ■ For audio music sources 50
- ■ For various sources 51
- ■ For visual sources of music 52
- ■ For movie sources 52
- ■ Stereo playback 53
- Using CINEMA DSP 3D mode 54
- Enjoying unprocessed input 54
- Using audio features 55
- Adjusting the speaker level 56
- 2-channel stereo 56
- FM/AM tuning 57
- Automatic preset tuning 58
- Manual preset tuning 58
- Selecting preset stations 59
- Exchanging preset stations 59
- XM™ Satellite Radio tuning 60
- 1 Rotate the 61
- ■ All Channel Search mode 62
- ■ Category Search mode 62
- ■ Preset Search mode 62
- ■ Direct Number Access mode 62
- Displaying the XM™ Satellite 64
- Radio information 64
- Using iPod™ 66
- Using Network/USB features 68
- ■ Remote control operation 69
- Using a PC server or Yamaha 70
- MCX-2000 70
- Using the Internet Radio 71
- USB portable audio player 72
- Using shortcut buttons 72
- (1-8) (6) 73
- Recording 74
- Advanced sound configurations 75
- SUR.DECODE 76
- Stereo/Surround 78
- (Stereo/Surround menu) 78
- “Yes” (see page 92) 79
- Rev. Delay 82
- Rev. Level 82
- The Compressed Music 83
- Enhancer mode 83
- Decoder parameter Features 84
- Input Select 85
- ■ I/O Assignment 86
- (Input/output assignment) 86
- ■ Decoder Mode (Decoder mode) 86
- Manual Setup (Volume) 88
- Manual Setup (Sound) 89
- ■ Tone Control (Tone control) 90
- ■ Lipsync 91
- ■ Channel Mute (Channel mute) 92
- Manual Setup (Video) 93
- Short Message 94
- On Screen 94
- Position 94
- Wall Paper 94
- Manual Setup (Basic) 95
- Manual Setup (NET/USB) 98
- Manual Setup (Option) 100
- ■ Zone2 Set/Zone3 Set 101
- (Zone 2/Zone 3 setting) 101
- Signal Info 102
- (Input signal information) 102
- Language 103
- 1 Press 104
- SYSTEM MEMORY 105
- Using examples 106
- CLASSICAL LIVE/CLUB 108
- ENTERTAIN 108
- Remote control features 109
- Set to SOURCE 110
- Setting remote control codes 111
- Programming codes from other 113
- Changing source names in the 114
- Macro programming features 115
- ■ Default macro functions 116
- 4 Press 117
- Clearing configurations 118
- 2 Press 119
- 3 Press and hold 119
- 2 Press and hold 120
- 3 Press 120
- ■ Using external amplifiers 121
- Controlling Zone 2 or Zone 3 122
- Advanced setup 126
- ■ Wake on RS-232C access 127
- ■ Remote control AMP ID 127
- ■ Remote control TUNER ID 128
- Troubleshooting 131
- ADDITIONAL 133
- INFORMATION 133
- ■ Remote control 135
- ■ Network and USB 136
- ■ Auto Setup 139
- During Auto Setup 140
- After Auto Setup 140
- Resetting the system 141
- Glossary 142
- ■ Frequency 147
- ■ Q factor 147
- Specifications 148
- ■ HDMI signal compatibility 149
- ■ Numerics 150
- DEFG H IJ MKL 154
- GPL/LGPL 158
- APPENDIX 159
- MODIFICATION 160
- List of remote control codes 162
- SATELLITE TUNER 163
- TAPE DECK 163
- Printed in Malaysia 169
Produits connexes et manuels pour Récepteurs AV Yamaha RX-V3800
Récepteurs AV Yamaha RX-Z1 Manuel
(95 pages)
(95 pages)
Récepteurs AV Yamaha RX-V565 Manuel
(76 pages)
(76 pages)
(323 pages)
Récepteurs AV Yamaha RX-V1 Manuel
(95 pages)
(95 pages)
Récepteurs AV Yamaha RX-V740 Manuel
(71 pages)
(71 pages)
© 2020, manymanuals.fr. Tous droits réservés | 0.442 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Commentaires sur ces manuels