Yamaha PLG150AN Manuel du propriétaire télécharger pdf (Page 18)

Installing and Starting the Plug-in Editor Software

(Windows 95/98)

Installing the Software

Double-click the “Setup.exe” ﬁle in the “plg-an” folder on the ﬂoppy disk to start the installation.

Click “Next” or “Yes” and follow the subsequent instructions on the screen to complete the installa-

tion.

Starting the AN Easy Editor

Start XGworks (or XGworks lite).

Click the “Plug-in” menu and select “AN

Easy Editor.”

Alternately, press Alt + P, then A, and ENTER. The

“Select AN Part” dialog box appears.

Set the desired Part number and click “OK.”

The AN Easy Editor window appears.

If the PLG150-AN has been

properly installed and all com-

puter/MIDI connections have

been properly made, operating

the AN Easy Editor should

directly affect the PLG150-AN.

For details on using the AN Easy

Editor, refer to the on-line help

ﬁle that is included with the soft-

ware.

When using a Modular Synthesis Plug-in System “mother” device, the Part assignment depends on

which mode is used — Voice or Performance — and also on whether the PLG150-AN board is

installed/assigned to PLG1 or PLG2, as described below.

When using the Voice mode:

Depending on which slot the PLG150-AN board has been installed to, press PLG1 or PLG2, then

set the Part to “1” (no matter what the PLG1 or PLG2 assignment is).

When using the Performance (Multi) mode:

If the PLG150-AN board is assigned to PLG1, set the Part to “16.”

If the PLG150-AN board is assigned to PLG2, set the Part to “15.”

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 76 77

Pas de commentaire

Yamaha PLG150AN Manuel du propriétaire Page 18