Yamaha ELB-02 Manuel du propriétaire Page 199

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 215
  • Table des matières
  • DEPANNAGE
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 198
199
10
ELB-02 Owner’s Manual
Connections
2 As necessary, set the detailed settings.
Press the [A] – [D] buttons corresponding to “CHANGE” or “SHOW” in the
display to call up the display for Setting/Input.
3 Save the settings.
Press the [D] “EXIT” button. A message appears prompting confirmation of
operation when there is a change in the setting. Press the [C] “OK” button to
execute the operation, or press the [D] button to cancel. When the operation is
completed, the LCD returns to the previous display.
Wireless LAN
mode
Display Item Default setting Setting/Input
INFRASTRUCTURE
mode
DETAIL
display
Page 1
DHCP
ON
Determines whether or not DHCP is used. If your router
is compatible with DHCP, select “ON (set DNS
automatically)” here.
Select on or off by using the DATA CONTROL dial then
press the [C] “CHANGE” button.
IP Address
0.0.0.0
Set the wireless LAN detailed settings. IP Address,
Subnet Mask, Gateway, DNS Server1, DNS Server2
can be set when DHCP is set to Off but cannot be set
when DHCP set to On. For details on confirmation and
changes in the setting of the access point on the router
side, refer to the owner’s manual for the product you
are using.
For details on how to enter characters, refer to the
“Changing the Song/Folder Name” on page 144. The
setting range is 0.0.0.0-255.255.255.255.
Subnet Mask
0.0.0.0
DETAIL
display
Page 2
Gateway
0.0.0.0
DNS Server 1
0.0.0.0
DNS Server 2
0.0.0.0
ADHOC mode ADHOC
display
Page 1
SSID ap-ELB-02-(last 6
characters of MAC
address in
lowercase); or
simply “ap-ELB-02,”
if MAC address
cannot be used.
To find the specific MAC address, see “MAC address”
below.
SSID, Security and Password can be set in the same
way as those described in the section “Manual
Setup” on page 195. The last 6 characters of the
MAC address must be entered in lowercase.
Channel can be selected by the DATA CONTROL
dial and set by pressing the button corresponding to
“CHANGE.”
DHCP and IP Address can be set in the same way
as those of “INFRASTRUCTURE mode” in this table.
Subnet Mask can be selected in the list.
Channel
11
ADHOC
display
Page 2
Security
Password
ADHOC
display
Page 3
DHCP
ON
IP Address
192.168.0.1
Subnet Mask
255.255.255.0
INFRASTRUCTURE
mode /
ADHOC mode
DETAIL
display
HOST NAME ELB-02-(last 6
characters of MAC
address in
lowercase); or
simply “ELB-02,” if
MAC address
cannot be used.
To find the specific MAC address, see “MAC address”
below.
Set the Host name. Up to 57 characters (half size)
including alphanumeric characters, the “_”
(underscore) and “-” (hyphen) character. For details on
how to enter characters, refer to the “Changing the
Song/Folder Name” on page 144. After entering the
characters, press the [D] “EXIT” button to finalize the
setting.
The last 6 characters of the MAC address must be
entered in lowercase.
MAC address
Shows the MAC address of the USB wireless LAN
adaptor. You cannot change the MAC address here.
STATUS
00000000
Shows the error code of network function.
Vue de la page 198
1 2 ... 194 195 196 197 198 199 200 201 202 203 204 ... 214 215

Commentaires sur ces manuels

Pas de commentaire