Yamaha ELB-02 Manuel du propriétaire télécharger pdf (Page 191)

191

ELB-02 Owner’s Manual

Connections

3 Expression

Determines the control of the expression pedal functions. Ordinarily, this control

is set to Auto.

Successive presses of the [C] button alternate among Auto, Internal and External.

Auto: Internal and External is automatically switched.

Internal: You can manually control the expression pedal even during MDR.

playback.

External: While playing the MDR or receiving MIDI messages, the expression

pedal has no effect. (The volume is controlled by the recorded data in a

USB flash drive or received MIDI data.)

For setting the channels over which MIDI information will be transmitted.

Any channel from 1 through 16 can be assigned to each keyboard, the Upper

Keyboard, the Lower Keyboard and the Pedalboard. The MIDI messages on

each keyboard will be sent over the channels set here. You must set the

transmit channel here to match the receive channel of the connected device.

1 Upper Keyboard

You can select the channel for the Upper Keyboard.

Press the [A] button to select the item, then use the DATA CONTROL dial to select the

setting.

2 Lower Keyboard

You can select the channel for the Lower Keyboard.

Press the [B] button to select the item, then use the DATA CONTROL dial to select the

setting.

3 Pedalboard

You can select the channel for the Pedalboard.

Press the [C] button to select the item, then use the DATA CONTROL dial to select the

setting.

4 Rhythm

Deletes unnecessary MIDI data and keeps it from being transmitted from the Electone.

Rhythm start/stop messages can be filtered on the Electone.

Successive presses of the [D] button alternate between being transmitted (FILTER

OFF) and not transmitted (FILTER ON).

MIDI Out Channel Display

1 2 ... 186 187 188 189 190 191 192 193 194 195 196 ... 214 215

Pas de commentaire

Yamaha ELB-02 Manuel du propriétaire Page 191