Yamaha V1 Manuel télécharger pdf (Page 31)

Input Meter Bridge

FOLLOW PANEL mode

When the FOLLOW PANEL button is on, the combination of input channels displayed in the meter bridge will vary

depending on the type of input channels that are currently assigned to the INPUT blocks.

Use the following buttons to select the combination that will be displayed.

• button

(Selectable only when the FOLLOW PANEL button is on)

When this button is on, the forty-eight meters at left and right will display the input levels of the input channels cur-

rently assigned to INPUT blocks 1–4.

At this time, the MIX/MATRIX bus number LED located at the bottom of the meter bridge will go dark. In the

METER section, the METER SELECT [MIX 25-48] switch will blink, and the [MATRIX 1-24] switch will go dark.

FOLLOW PANEL button is on

Selectable combination

INPUT block 2

INPUT block 1 INPUT block 3

INPUT block 4

INPUT block 1 INPUT block 4INPUT block 2 INPUT block 3

[Meter bridge]

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 55 56

Pas de commentaire

Yamaha V1 Manuel Page 31