Yamaha MCR-640 Manuel télécharger pdf (Page 20)

FM TUNING

18 En

TUNER OPERATIONS

There are 2 tuning methods: automatic and manual. You can also use the automatic and manual preset tuning features to

store up to 30 stations.

Automatic tuning is effective when station signals are

strong and there is no interference.

Press TUNER to set the receiver to FM mode.

2 Press and hold TUNING for more than

2 seconds to begin automatic tuning.

When the receiver is tuned into a station, the TUNED

indicator lights up and the frequency of the received

station is shown on the front panel display.

• Press to tune into a lower frequency.

• Press to tune into a higher frequency.

If the signal received from the station you want to select is

weak, tune into it manually.

Press TUNER to set the receiver to FM mode.

2 Press TUNING to tune into the desired

station manually.

Follow the procedure below to preset radio stations

automatically.

Press TUNER to set the receiver to FM mode.

2 Press and hold MEMORY for more than 2

seconds.

The PRESET indicator starts flashing on the front

panel display and automatic station preset starts.

When all frequencies are searched, preset stops

automatically.

• The search starts at the lowest frequency and goes

toward the highest frequency.

• The receiver automatically applies a preset number

to each detected station.

• To cancel the search, press MEMORY.

Notes

• You can preset up to 30 FM stations.

• Any stored station data existing under a preset station number is

cleared when you store a new station under the same preset

station number.

FM TUNING

Automatic tuning

Manual tuning

TUNING

TUNER

Automatic preset tuning

PRESET u / d

TUNER

MEMORY

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 91 92

Commentaires sur ces manuels

Pas de commentaire

Yamaha MCR-640 Manuel Page 20

Commentaires sur ces manuels

Produits connexes et manuels pour Lecteurs de CD Yamaha MCR-640