Yamaha RX-V465 Manuel du propriétaire télécharger pdf (Page 40)

38 En

When using sound field programs for movies or TV

programs, you can select a surround decoder to be used

with the sound field program after setting the parameters

from the following decoders. To set the parameters for

sound field programs, see the following section.

Decoders that can be used with a sound field

program

• PLIIx Movie (PLII Movie)

• Neo:6 Cinema

Note

• The following MOVIE sound field programs cannot be used with a

surround decoder.

– Mono Movie

– Sports

– Action Game

– Roleplaying Game

Although the field sound programs would satisfy you as

they are with the default parameters, you can arrange

sound effect or decoders suitable for acoustical conditions

of sources or rooms by setting the parameters (sound field

elements).

• You can protect the sound field against the changes of parameters the

sound filed parameters when “Memory Guard” of the setup menu is set

to “On” (see page 45). To change the parameters, set it to “Off.”

1 Press lSETUP on the remote control.

The setup menu appears on the front panel display.

2 Press nCursor k / n to select “DSP

Parameter” and press nENTER.

The screen changes as follows.

3 Press nCursor l / h to select the sound

field program.

4 Press nCursor k / n to select the parameter

that you want to change, and press nCursor

l / h to change the parameter.

You can change the parameter display in the

following order by pressing nCursor n repeatedly.

• sound field program

• surround decoder

• sound field parameter

For sound field parameters, see “Sound field

parameters” on this page.

• Repeat steps 4 and 5 to change other sound field program

parameters.

5 To end the edit, press lSETUP.

• The default settings are marked with “*.”

DSP Level

Fine adjusts an effect level (level of the sound field effect

to be added). You can adjust the level of the sound field

effect while checking sound levels. Adjust “DSP Level” as

follows.

• The effect sound is too soft.

• There are no differences between effects of the sound

field programs.

→Increase the effect level.

• The sound is dull.

• The sound field effect is added too much.

→Reduce the effect level.

■ 2ch Stereo only

Direct

Automatically bypasses the DSP circuit and tone control

circuit when an analog sound source is selected as the

input source. You can enjoy a higher quality sound.

■ 7ch Stereo only

CT Level/SL Level/SR Level/

SB Level

Adjusts the volume of the center (CT), surround L (SL)

surround R (SR) and surround back (SB) channels in the

7ch Stereo program. The available parameters differ

depending on the setting of the speakers.

Editing surround decoders/sound field programs

Selecting a decoder used with a sound

field program

Setting sound field parameters

PRM:Sci-Fi

Sound field program

To initialize the parameters of the selected sound field

program, nCursor n repeatedly to select “Initialize”

and then press, nCursor h. When “Press Again h”

appears on the front panel display, press nCursor h

again, press nCursor h to confirm the initialization

or nCursor l to cancel it.

Sound field parameters

CINEMA DSP parameters

Adjustable range: -6 dB to 0 dB* to +3 dB

Parameters only usable in certain sound

field programs

Choices: Auto*/Off

Auto Outputs sound by bypassing the DSP circuit and

tone control circuit when the “Bass” and “Treble”

tone controls are both set to 0 dB.

Off Do not bypass the DSP circuit and tone control

circuit.

Adjustable range: 0 to 100%

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 135 136

Commentaires sur ces manuels

Pas de commentaire

Yamaha RX-V465 Manuel du propriétaire Page 40

Commentaires sur ces manuels

Produits connexes et manuels pour Récepteurs AV Yamaha RX-V465