Yamaha RX-V465 Manuel du propriétaire télécharger pdf (Page 43)

41 En

Operating various settings for this unit (Setup menu)

English

INTRODUCTION

ADDITIONAL

INFORMATION APPENDIX

PREPARATION

BASIC

OPERATION

ADVANCED

OPERATION

1 Press lSETUP on the remote control.

The setup menu screen appears.

2 Select a menu using nCursor k / n, and

press nENTER.

Items of the selected menu are displayed. For

example, the following screen appears when you

select “Func. Setup.”

• You can return to the previous screen by pressing nRETURN.

3 To display submenus, select a menu that you

want to set using nCursor k / n, and press

nENTER.

For example, the following screen appears when you

select “2 Display.”

4 Select an item using nCursor k / n, and

change the setting of the item using

nCursor l / h.

• You can change other items by repeating step 4.

5 To finish the setting, press lSETUP.

• When nCursor or other keys do not work after completing the menu,

select the input source again using gInput selection keys.

You can set various items for speakers. Two kinds of

adjustments are available. One is “Auto Setup (YPAO)”

for automatic adjustment and another is “Manual Setup”

for manual adjustment.

• The default settings are marked with “*.”

Automatically adjusts output characteristics of speakers to

obtain optimum balance for the output sound based on

positions and performances of the speakers and acoustic

characteristics or the room, which are automatically

measured. For details on operations, see page 18.

Adjusts output characteristics of speakers based on

manually set parameters.

After Auto Setup (YPAO) is performed, you can check

automatically adjusted parameters in the Manual Setup

menu. Fine adjust the parameters for your preference if

necessary.

■ A)Config

Sets speaker configurations, such as connection status of

speaker and a size of the connected speaker (sound

reproduction capacity), suitable for the listening

environment.

• The speaker configuration includes items for defining a speaker size:

Large or Small. Large and Small refer to speakers with woofer diameters

16 cm or larger and smaller than 16 cm, respectively.

Bass Out

Selects speaker(s) for outputting low-frequency

components of the LFE (low-frequency effect sound)

channel or other channels. The output status is as follows.

LFE channel signals

Basic operation of the setup menu

1HDMI

Dimmer;;;;;;;0

Speaker Setup

1 Auto Setup

2 Manual Setup

Choices: SWFR/Front/Both*

Parameter Subwoofer

Front

speakers

Other

speakers

Both Output Not output Not output

SWFR Output Not output Not output

Front Not output Output Not output

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 135 136

Commentaires sur ces manuels

Pas de commentaire

Yamaha RX-V465 Manuel du propriétaire Page 43

Commentaires sur ces manuels

Produits connexes et manuels pour Récepteurs AV Yamaha RX-V465