Yamaha QL5 Manuel du propriétaire télécharger pdf (Page 28)

Basic operation of the QL series

Owner’s Manual

Initializing settings

Here’s how you can return the EQ/dynamics settings of

the currently selected channel or the effect settings of a

rack to their initial state. GEQ settings can be initialized

using the FLAT button in the screen.

1. Access a window that contains tool buttons.

2. Select the channel (EQ/dynamics) or rack

(effect/Premium Rack) whose settings you want

to initialize.

3. Press the DEFAULT button.

A dialog box will ask you to confirm the Initialize

operation.

4. Press the OK button to execute the Initialize

operation.

The EQ/dynamics settings of the channel you

selected in step 2 or the effect/processor settings of

the rack will be initialized. If you decide to cancel

the initialization, press the CANCEL button instead

of the OK button.

NOTE

In the case of EQ/dynamics, you can use the channel

number/channel name buttons in the 8ch/ALL window to

select a range of channels and initialize them

simultaneously.

Copying and pasting

settings

Here’s how you can copy the EQ/dynamics settings of

the currently selected channel or the

GEQ/effect/premium rack settings of the currently

selected rack to buffer memory, and then paste them to

a different channel or rack. Copy/paste is limited to the

following combinations.

• Between input channel EQ settings

• Between output channel EQ settings

• Between dynamics processors for which the

paste-destination has the same type (GATE,

DUCKING, COMPRESSOR, EXPANDER,

COMPANDER-H, COMPANDER-S, or DE-ESSER) as

the copy-source

• Between effects/GEQ mounted in a rack

• Between the same processors mounted in a premium

rack

NOTE

Only 31BandGEQ settings that use less than fifteen bands

can be copied to a Flex15GEQ.

1. Access a window that contains tool buttons.

2. Select the channel (EQ/dynamics) or rack

(GEQ/effect/premium rack) whose settings you

want to copy.

3. Press the COPY button.

The current settings will be copied to buffer

memory.

NOTE

• Be aware that if you copy other settings before you paste,

the buffer memory will be overwritten.

• You can select only one channel or rack as the

copy-source. If multiple channels are selected in the

8ch/ALL window, you won’t be able to press the COPY

button.

4. Select the paste-destination channel or rack.

NOTE

If you’re pasting EQ/dynamics settings, you can use the

8ch/ALL window to select multiple channels as the

paste-destination. In this case, the same content will be

pasted to all selected channels.

5. Press the PASTE button.

The settings of the channel (EQ/dynamics) or the

rack (GEQ/effect/premium rack) you selected in

step 2 will be pasted.

NOTE

• Be aware that when you paste, the settings will overwrite

the paste-destination.

• If nothing has been copied to the buffer memory, the

PASTE button cannot be used (is ghosted).

• Of the two types of GEQ, using the tool buttons in a rack

where a Flex15GEQ is selected will cause rack settings A

and B to be copied/pasted individually.

• You cannot paste effect settings that use effect types

“HQ.Pitch” or “Freeze” to racks 2, 4, 6 or 8.

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 57 58

Commentaires sur ces manuels

Pas de commentaire

Yamaha QL5 Manuel du propriétaire Page 28

Commentaires sur ces manuels

Produits connexes et manuels pour Mélangeurs audio Yamaha QL5