Yamaha PLG150AN Manuel du propriétaire télécharger pdf (Page 53)

MIDI Data Format

1.4 Program change

This message is used to switch voices.

It changes the program number on the receiving channel. When the change is to

include the voice bank, transmit the program change after sending the Bank

Select message (see 1.2.1).

If the Multi Part parameter Rcv PROGRAM CHANGE = OFF, that part will not

receive program changes.

1.5 Pitch bend

This message conveys information on pitch bend operations.

Basically, this message is for changing the pitch of a part, but the depth of the fol-

lowing six effects can be controlled.

The effect of this message can be modiﬁed by the following parameters.

* Multi Part Parameter

1. BEND PITCH CONTROL

2. BEND FILTER CONTROL

3. BEND AMPLITUDE CONTROL

4. BEND LFO PMOD DEPTH

5. BEND LFO FMOD DEPTH

6. BEND LFO AMOD DEPTH

By default, the Pitch Control effect is applied.

If the Multi Part parameter Rcv PITCH BEND CHANGE = OFF, that part will

not receive pitch bend messages.

1.6 Channel aftertouch

This message conveys the pressure after the key is played on the keyboard (for an

entire MIDI channel). The pressure can be controlled for each part. This message

will affect the notes currently playing.

The effect of this message can be modiﬁed by the following parameters.

* Multi Part Parameter

1. CAT PITCH CONTROL

2. CAT FILTER CONTROL

3. CAT AMPLITUDE CONTROL

4. CAT LFO PMOD DEPTH

5. CAT LFO FMOD DEPTH

6. CAT LFO AMOD DEPTH

By default, there will be no effect.

If the Multi Part parameter Rcv CHANNEL AFTER TOUCH = OFF, that part

will not receive Channel Aftertouch.

2. System exclusive messages

2.1 Parameter changes

This device uses the following parameter changes.

[ UNIVERSAL REALTIME MESSAGE ]

1) Master Volume

[ UNIVERSAL NON REALTIME MESSAGE ]

1) General MIDI System On

[ DX1 PARAMETER CHANGE]

1) DX1 Master Tuning

[ XG PARAMETER CHANGE]

1) XG System on

2) XG System parameter change

3) Multi Part parameter change

4) PLG150-AN Part Assign parameter change

[ PLG150-AN NATIVE PARAMETER CHANGE ]

1) PLG150-AN System parameter change

2) PLG150-AN Part parameter change

3) AN1x System parameter change

4) Current Voice Common parameter change

5) Current Voice Scene parameter change

6) Currnet Voice Step Seq. Patten parameter change

2.1.1 Universal realtime messages

2.1.1.1 Master Volume

11110000 F0H = Exclusive status

01111111 7FH = Universal Real Time

01111111 7FH = ID of target device

00000100 04H = Sub-ID #1=Device Control Message

00000001 01H = Sub-ID #2=Master Volume

* 0sssssss SSH = Volume LSB

0ttttttt TTH = Volume MSB

11110111 F7H = End of Exclusive

11110000 F0H = Exclusive status

01111111 7FH = Universal Real Time

0xxxnnnn XNH = Device Number, xxx = don't care

00000100 04H = Sub-ID #1=Device Control Message

00000001 01H = Sub-ID #2=Master Volume

0sssssss SSH = Volume LSB

0ttttttt TTH = Volume MSB

11110111 F7H = End of Exclusive

When received, the Volume MSB is reﬂected in the System Parameter MAS-

TER VOLUME.

* The binary expression 0sssssss is expressed in hexadecimal as SSH.

The same applies elsewhere.

2.1.2 Universal non-realtime messages

2.1.2.1 General MIDI System On

11110000 F0H = Exclusive status

01111110 7EH = Universal Non-Real Time

01111111 7FH = ID of target device

00001001 09H = Sub-ID #1=General MIDI Message

00000001 01H = Sub-ID #2=General MIDI On

11110111 F7H = End of Exclusive

11110000 F0H = Exclusive status

01111110 7EH = Universal Non-Real Time

0xxxnnnn XNH = N:Device Number, X:don't care

00001001 09H = Sub-ID #1=General MIDI Message

00000001 01H = Sub-ID #2=General MIDI On

11110111 F7H = End of Exclusive

When this message is received, the XG parameters are initialized.

Since approximately 50ms is required to process this message, be sure to

allow an appropriate interval before sending the next message.

2.1.3 DX1 MASTER TUNING

11110000 F0H Exclusive status

01000011 43H YAMAHA ID

0001nnnn 1NH N:device Number

00000100 04H

01000000 40H

0vvvvvvv VVH Data

11110111 F7H End of Exclusive

The DX1-compatible messages are received, and the Master Tune of the

AN1x System Data is changed.

The value of VV is used as the MIDI master tuning parameter.

VV = -64(00H) — 0(40H) — +63(7FH)

2.1.4 XG Parameter Change

This message sets XG-related parameters. Each message can set a single

parameter.

The message format is as follows.

11110000 F0H Exclusive status

01000011 43H YAMAHA ID

0001nnnn 1NH N:device Number

01001100 4CH Model ID

0ggggggg GGH Address High

0mmmmmmm MMH Address Mid

0lllllll LLH Address Low

0vvvvvvv VVH Data

: :

11110111 F7H End of Exclusive

For parameters whose Data Size is 2 or 4, the appropriate amount of data will

be transmitted as indicated by Size.

2.1.4.1 XG System On

11110000 F0H Exclusive status

01000011 43H YAMAHA ID

0001nnnn 1NH N:device Number

01001100 4CH Model ID

00000000 00H Address High

00000000 00H Address Mid

01111110 7EH Address Low

00000000 00H Data

11110111 F7H End of Exclusive

When ON is received, the XG parameters are initialized.

Since approximately 50ms is required to process this message, be sure to

allow an appropriate interval before sending the next message.

2.1.4.2 XG System parameter change

This message sets the XG SYSTEM block (see Tables <1-1> and <1-2>).

2.1.4.3 Multi Part parameter change

This message sets the Multi Part block (see Tables <1-1> and <1-3>).

2.1.4.4 Part Assign parameter change

This message sets the part assigned to PLG150-AN (see Tables <1-1> and

<1-4>).

1 2 ... 48 49 50 51 52 53 54 55 56 57 58 ... 76 77

Commentaires sur ces manuels

Pas de commentaire

Yamaha PLG150AN Manuel du propriétaire Page 53

Commentaires sur ces manuels

Produits connexes et manuels pour Égalisateurs audio Yamaha PLG150AN