Yamaha NS-PA150 Manuel d'utilisateur télécharger pdf (Page 5)

3 En

Installing the speakers

English

Wall-mounting the speakers

You can mount the speakers on the wall as follows.

1 Install screws into a solid wall or wall support

as shown in the illustration. Use 3.5 to 4 mm

(1/8") diameter self-tapping screws.

2 Hang each speaker by its keyhole slots onto

the protruding screws.

Note

• Make sure the shaft of the screw is seated in the narrow

part of the keyhole slot. Otherwise, the speaker may fall.

Warnings

• NS-B150 speaker weighs 1.2 kg (2.6 lbs.) and

NS-C150 speaker weighs 2.1 kg (4.6 lbs.). Do not

mount the speakers on thin plywood or on a wall

with a soft surface material. Otherwise, the screws

may pull out of the surface and the speakers may fall,

possibly damaging the speakers or causing personal

injury.

• Do not affix the speakers to a wall using nails,

adhesives, or unstable hardware. Long-term use and

vibration may cause the speakers to fall.

• To avoid accidents resulting from tripping over loose

speaker cables, affix the cables to the wall.

• Mount the speakers in a wall location that will be

unlikely to result in injury to an individual’s head.

•

When using speaker brackets (commercially available)

to mount the speakers on the wall or ceiling, we

strongly recommend using safety wire (may be

supplied with the bracket) between the speaker and

bracket to prevent the speaker from falling.

• When installing these speakers on a wall mounted

bracket, it is essential that they are firmly secured.

Be sure to consult a reliable source about the best

type of fastener for your particular wall / ceiling’s

construction.

■ Mounting the center speaker on the Yamaha YTS-F500/YTS-T500 TV stand

You can use the screw holes [diameter: 6 mm (1/4"), hole depth: 16 mm (5/8")] on the rear of this unit to mount the

speaker on the YTS-F500/YTS-T500. For installation details, please refer to the owner’s manual that came with the

YTS-F500/YTS-T500.

Notes

• Be careful not to pinch the speaker cables between the speaker and the speaker bracket or speaker stand.

• Do not lean or place any object on the speaker. Otherwise, the TV stand bracket may be deformed.

26 mm (1")

Wall/wall

support

3 mm

(1/8")

Minimum

20 mm (3/4")

NS-B150

NS-C150

210 mm (8-1/4")

290 mm (11-1/2")

95 mm

(3-3/4")

Insert screws “D (M6 x 16)” that

came with the YTS-F500/YTS-T500

into the screw holes.

Rear view

NS-C150

Use speaker bracket “B”

that came with the

YTS-F500/YTS-T500.

NS-C150

(Installation example

using YTS-F500)

1 2 3 4 5 6 7 8 9 10 ... 35 36

Commentaires sur ces manuels

Pas de commentaire

Yamaha NS-PA150 Manuel d'utilisateur Page 5

Commentaires sur ces manuels

Produits connexes et manuels pour Acoustique Yamaha NS-PA150