Yamaha QL5 Manuel Page 60
- Page / 311
- Table des matières
- MARQUE LIVRES
Noté. / 5. Basé sur avis des utilisateurs
EQ and Dynamics
Reference Manual
60
M HPF type select button (input channels only)
Switches the HPF attenuation per octave between -12 dB/oct and -6 dB/oct.
N HA HPF ON indicator
Indicates the HPF on/off status of the external head amp.
O FREQUENCY
Indicates the HPF cutoff frequency of the external head amp.
HPF/EQ window (8ch)
This window displays the input channel or output channel EQ settings in groups of 8 channels
simultaneously. Use the knobs in the SELECTED CHANNEL section to edit the EQ settings.
1 Channel select button
Selects the channel that you want to control. The current channel icon and number
appear on the button, and the channel name appears immediately below the button.
2 EQ graph
Displays the parameter values for the EQ and filter. The currently-selected EQ type
appears below the graph.
3 EQ ON/OFF button
Switches the EQ on or off. The OVER indicator (located to the right above the button)
lights if the post-EQ signal is clipping.
4 HPF FREQUENCY knob (input channels only)
Indicates the cutoff frequency of the HPF. You can use the knobs in the SELECTED
CHANNEL section to adjust this.
5 HPF ON/OFF button (input channels only)
Switches the HPF on or off.
1
2
3
5
4
- Reference Manual 1
- Contents 2
- Function Tree 4
- SELECTED CHANNEL section 10
- Reference Manual 10
- 4 Mute group select buttons 11
- 5 MUTE SAFE button 11
- 6 DCA group indicators 11
- Channel Strip section 12
- DCA group field 15
- Mute group field 15
- Input and output patching 16
- PATCH/NAME screen 17
- CH SELECT screen 19
- 77 663 9 20
- INSERT screen (8ch) 21
- 2 Port select buttons 22
- 3 CLOSE button 22
- DIRECT OUT screen (8ch) 23
- Input channels 25
- 2 Icon select buttons 27
- 3 Sample name setup buttons 27
- When selecting the NAME tab 27
- Making HA (Head Amp) settings 28
- GAIN/PATCH window (8ch) 29
- 2 PATCH button 30
- 3 HA section 30
- GAIN/PATCH window 31
- STEREO/MONO bus 33
- TO STEREO/MONO window (8ch) 34
- 8 LCR button 35
- 4. This 35
- 9 CSR knob 35
- TO STEREO/MONO window 36
- MATRIX bus 38
- MIX SEND/MATRIX SEND window 39
- SENDS ON FADER mode 40
- INPUT DELAY window (8ch) 41
- LR-MONO 43
- Setting procedure 43
- 1 LR-MONO SELECT field 43
- 2 LR-MONO SELECT button 43
- Setting Surround mode 44
- SELECTED CHANNEL VIEW screen 44
- OVERVIEW screen 45
- SURROUND PAN 1CH screen 46
- 1 Surround graph 47
- 2 L/R F/R switch button 47
- Channel library operations 48
- OUTPUT channels 49
- MONO bus 51
- MONO channels to MATRIX buses 53
- 6 PRE/POST button 54
- 7 SEND ON/OFF button 54
- 8 SEND PAN/BALANCE knob 54
- 9 SEND LEVEL knob 54
- OUTPUT PORT screen 55
- 6 DELAY button 56
- 7 Ø (Phase) button 56
- 8 GAIN knob 56
- 9 Level meter 56
- EQ and Dynamics 58
- HPF/EQ window (8ch) 60
- Using dynamics 61
- DYNAMICS1/2 window (1ch) 62
- DYNAMICS1/2 window (8ch) 63
- ST IN (QL1), OUTPUT) 64
- EQ library 64
- Dynamics library 64
- Channel Job 65
- Mute group 67
- 1 CLEAR ALL button 68
- 3 Mute group assign field 68
- 4 NAME EDIT button 68
- Using mute groups 69
- Using the Mute Safe function 70
- RECALL SAFE MODE window 71
- 5 Channel select button 72
- 6 Selected channel display 72
- A CLOSE button 73
- Channel Link function 74
- 1 Input channel display field 75
- 2 Link indicator 75
- 3 LINK PARAMETER field 75
- 4 SEND PARAMETER field 76
- 5 INPUT/OUTPUT button 76
- Channel link operations 76
- CH LINK SET window 78
- CH COPY MODE window 79
- CH MOVE MODE window 80
- 1 5 2 3 4 80
- CH DEFAULT MODE window 81
- About Mix Minus 82
- Scene memory 83
- Storing and recalling scenes 84
- SCENE LIST window 85
- Recalling a scene 86
- Editing scene memories 88
- Scene memory editing 89
- Copying and pasting a scene 89
- Clearing a scene 89
- Cutting a scene 90
- Inserting a scene 90
- GLOBAL PASTE window 91
- FOCUS RECALL window 94
- Using the Fade function 95
- FADE TIME window 96
- 1 GPI OUT CONTROL buttons 97
- 2 CURRENT SETTING field 97
- SONG SELECT window 98
- Using Preview mode 99
- Monitor and Cue functions 100
- Using the Monitor function 101
- MONITOR screen 102
- MONITOR window 103
- 0 Meter field 104
- A ASSIGN field 104
- 8 MONITOR FADER field 104
- 9 MONITOR DELAY field 104
- MONITOR SOURCE SETUP screen 106
- Using the Cue function 107
- Operating the Cue function 108
- CUE window 110
- CUE screen (Surround mode) 114
- Talkback and Oscillator 115
- TALKBACK window 116
- Using the Oscillator function 117
- OSCILLATOR window 118
- 3 ASSIGN section 119
- 4 Meter section 119
- 5 OSCILLATOR OUTPUT button 119
- INPUT/OUTPUT/RTA tab 120
- INPUT METER screen 120
- OUTPUT METER screen 120
- Fader level and meter display 121
- METERING POINT field 121
- PEAK HOLD button 121
- SHOW SEND LEVEL button 122
- RTA METER screen 122
- (CUE B L,R) POST EQ 123
- (CUE B L,R) 123
- Function Access Area screen 124
- Premium Rack 125
- Virtual rack operations 126
- 4 INPUT PATCH button 127
- 5 OUTPUT PATCH button 127
- 6 Rack container 128
- Graphic EQ operations 129
- Inserting a GEQ in a channel 130
- GEQ EDIT window 130
- Using the 31BandGEQ 131
- GEQ EDIT window (31BandGEQ) 132
- Using the Flex15GEQ 132
- GEQ EDIT window (Flex 15GEQ) 133
- Parametric EQ operations 133
- PEQ EDIT window 133
- PEQ EDIT window (8PEQ) 135
- About AUTOMIXER 136
- Editing the internal effects 138
- STEREO type effects 139
- MIX type effects 139
- 1 Effect title/type 140
- 2 Input/output meters 140
- EFFECT EDIT window 141
- Using the Tap Tempo function 143
- Using the Premium Rack 146
- COMPRESSOR LIMITER 153
- Premium Rack libraries 157
- Using an I/O device 158
- DANTE INPUT PATCH window 159
- PORT SELECT window 160
- OUTPUT PATCH window 160
- I/O DEVICE screen (I/O page) 161
- 0 A67 8 9 163
- input/output is used 164
- 2 HA gain 165
- 3 Head amp HPF on/off 165
- I/O DEVICE HA window 166
- Remotely controlling an amp 167
- NAI48-ES 170
- Daisy chain network 171
- Ring connection 171
- 1 EXTERNAL HA field 172
- 2 ID/Model name/+48V master 172
- 3 Virtual racks 172
- EXTERNAL HA window 173
- INTERNAL HA window 174
- Basic MIDI settings 175
- 1 TERMINAL field 177
- 2 PORT NO. field 177
- 3 OK button 177
- 1 CH field 177
- 2 OK button 177
- 1 PROGRAM CHANGE field 178
- 2 PROGRAM CHANGE MODE field 178
- MIDI PROGRAM CHANGE window 179
- MIDI CONTROL CHANGE window 182
- Recorder 183
- CH SELECT window 184
- 3 4A0987 5 6 185
- RECORDER screen 187
- Editing the title list 188
- Required devices and software 189
- Word clock settings 190
- Dante Accelerator settings 190
- Setting up Dante Controller 191
- Setting up DAW software 191
- Audio recording and playback 191
- Preparing the project 192
- Recording into a project 192
- NUENDO LIVE SETUP window 193
- Playing a multi-track project 195
- About the SETUP screen 196
- BUS SETUP field 197
- D BUS SETUP button 197
- E SURROUND SETUP button 197
- User settings 199
- CREATE USER KEY window 201
- Logging-in 201
- Logging-in as Guest 202
- Logging-in as a User 202
- Changing the password 203
- Changing the user level 204
- Preferences 206
- USER DEFINED keys 208
- USER DEFINED knobs 214
- Custom fader bank 216
- USER SETUP window 217
- Console Lock 218
- SAVE/LOAD window 219
- SAVE SELECT screen 221
- 5 MULTI SELECT button 222
- 6 SELECT ALL button 222
- 7 CLEAR ALL button 222
- LOAD SELECT screen 223
- 1 2 3 4 5 224
- Formatting a USB flash drive 225
- Word clock and slot settings 226
- WORD CLOCK/SLOT window 227
- Using cascade connections 228
- QL BQL A 228
- 2 CASCADE LINK buttons 229
- 1 ATT knobs 231
- BUS SETUP window 232
- 1 2 3 4 5 6 7 233
- Setting the network address 234
- NETWORK window 235
- Daisy chain connections 239
- Redundant connections 239
- DANTE SETUP window 240
- 1 DEVICE LABEL 242
- 2 INPUT/OUTPUT knobs 242
- 3 Device label entry keyboard 242
- REMOTE HA settings 243
- REMOTE HA SELECT window 243
- Displaying the device status 244
- Messages 244
- Error messages 245
- Warning messages 245
- Using GPI IN 246
- MIDI/GPI screen (GPI page) 247
- Using GPI OUT 247
- Using FADER START 249
- 5 MODE field 250
- Help function 251
- Other functions 253
- ∞ dB (all the way down) 254
- EXIT button 257
- Warning/Error Messages 259
- Data List 263
- EQ Library List 264
- DYNAMICS Library List 265
- Data List 266
- * At fs=44.1 kHz 266
- Dynamics Parameters 267
- COMPRESSOR 268
- EXPANDER 268
- Effect Type List 269
- Effects Parameters 270
- STEREO REVERB 271
- EARLY REF 271
- GATE REVERB, REVERSE GATE 271
- MONO DELAY 271
- STEREO DELAY 271
- MOD. DELAY 272
- DELAY LCR 272
- CHORUS 272
- FLANGE 273
- SYMPHONIC 273
- PHASER 273
- DYNA.FLANGE 273
- DYNA.PHASER 274
- HQ.PITCH 274
- DUAL PITCH 274
- TREMOLO 274
- AUTOPAN 275
- ROTARY 275
- RING MOD 275
- MOD.FILTER 275
- DYNA.FILTER 275
- REV+CHORUS 276
- REVCHORUS 276
- REV+FLANGE 276
- REVFLANGE 276
- REV+SYMPHO 277
- REVSYMPHO 277
- REVPAN 277
- DELAY+ER 277
- DELAYER 278
- DELAY+REV 278
- DELAYREV 278
- DISTDELAY 279
- MULTI FILTER 279
- FREEZE 279
- DISTORTION 279
- AMP SIMULATE 280
- COMP276 280
- COMP276S 280
- COMP260 280
- COMP260S 280
- EQUALIZER601 281
- OPENDECK 281
- M.BAND DYNA 281
- M.BAND COMP 282
- Portico5033 282
- Portico5043 282
- Opt-2A 283
- Dynamic EQ 283
- Buss Comp 369 283
- Automixer Parameters 284
- NRPN parameter assignments 288
- Input channels 292
- MIX Channels 294
- MATRIX Channels 295
- STEREO, MONO Channels 296
- BUS SETUP 297
- SURROUND BUS 297
- MIDI Data Format 298
- 2 SYSTEM REALTIME MESSAGE 299
- 3 SYSTEM EXCLUSIVE MESSAGE 299
- 4 PARAMETER CHANGE details 300
- 4.5 EXIST LIBRARY RANGE 302
- 4.7 FUNCTION CALL – MODULE – 303
- 4.9 LEVEL METER DATA 304
- Input/Output Specifications 305
- Electrical characteristics 306
- Dynamic Range. Fs= 48 kHz 307
- Sampling Frequency 307
- Mixer Basic Parameters 308
- MIDI Implementation Chart 310
Produits connexes et manuels pour Logiciel Yamaha QL5
Logiciel Yamaha QL5 Manuel
(294 pages)
(294 pages)
Logiciel Yamaha CL5 Manuel
(302 pages)
(302 pages)
Logiciel Yamaha MOXF8 Manuel du propriétaire
(57 pages)
(57 pages)
Logiciel Yamaha V4.0 Manuel du propriétaire
(526 pages)
(526 pages)
Logiciel Yamaha V3 Manuel du propriétaire
(83 pages)
(83 pages)
Logiciel Yamaha MOX6 Manuel
(160 pages)
(160 pages)
Logiciel Yamaha XF6 Manuel
(255 pages)
(255 pages)
Logiciel Yamaha MOXF8 Manuel
(163 pages)
(163 pages)
Logiciel Yamaha MOX6 Manuel du propriétaire
(57 pages)
(57 pages)
Logiciel Yamaha PSR-S975 Manuel
(136 pages)
(136 pages)
Logiciel Yamaha Tyros3 Manuel
(130 pages)
(130 pages)
(2 pages)
(1 pages)© 2020, manymanuals.fr. Tous droits réservés | 0.068 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Commentaires sur ces manuels