Yamaha QL5 Manuel télécharger pdf (Page 240)

Setup

Reference Manual

240

Mounting an I/O device on the Dante audio network

Here’s how to select which of the multiple I/O devices on the Dante audio network will be

mounted so that they can be used. Up to 24 units can be mounted for one QL series console.

DANTE SETUP window (DEVICE MOUNT page)

1 CLEAR ALL button

Clears all I/O devices in the list to an unmounted state.

2 REFRESH button

Updates the displayed list of I/O devices on the Dante audio network.

3 I/O device select buttons

Press one of the buttons to open the DEVICE SELECT window. The upper line of the

button shows the device label. The lower line of the button shows the model name and

the number of inputs and outputs. If no device has been mounted, the upper row will

indicate “---” and the lower row will show nothing.

For more information on VIRTUAL/CONFLICT/DUPLICATE shown below these buttons,

refer to

1 on page 158, “I/O device list.”

DANTE SETUP window

1 Setup method select buttons

Choose one of the following methods for mounting the I/O device.

• NO ASSIGN ........................ Not mounted

• DEVICE LIST...................... Select and mount from the device list

• SUPPORTED DEVICE ....... Select and mount a supported device

• DVS..................................... Enter a device label and mount (only for DVS)

• MANUAL............................. Enter a device label and mount

STEP

1. Press the DEVICE MOUNT tab in the lower part of the DANTE SETUP window.

2. Press the I/O device select button.

3. In the DEVICE SELECT window, press the setup method select button.

4. Use the [TOUCH AND TURN] knob to make settings.

5. When you have finished making settings, press the OK button to close the window.

1 2

1 2 ... 235 236 237 238 239 240 241 242 243 244 245 ... 310 311

Pas de commentaire

Yamaha QL5 Manuel Page 240