Yamaha 2012 V Star 250 Manuel du propriétaire Page 75

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 98
  • Table des matières
  • DEPANNAGE
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 74
PERIODIC MAINTENANCE AND ADJUSTMENT
7-39
7
6. Tighten the brake torque rod nut to
the specified torque.
7. Adjust the drive chain slack. (See
page 7-24.)
8. Tighten the locknuts, and then
tighten the axle nut to the specified
torques.
9. Adjust the brake pedal free play.
(See page 7-21.)
WARNING
EWA10660
After adjusting the brake pedal free
play, check the operation of the
brake light.
EAU25851
Troubleshooting
Although Yamaha motorcycles receive
a thorough inspection before shipment
from the factory, trouble may occur dur-
ing operation. Any problem in the fuel,
compression, or ignition systems, for
example, can cause poor starting and
loss of power.
The following troubleshooting chart
represents a quick and easy procedure
for checking these vital systems your-
self. However, should your motorcycle
require any repair, take it to a Yamaha
dealer, whose skilled technicians have
the necessary tools, experience, and
know-how to service the motorcycle
properly.
Use only genuine Yamaha replace-
ment parts. Imitation parts may look like
Yamaha parts, but they are often inferi-
or, have a shorter service life and can
lead to expensive repair bills.
WARNING
EWA15141
When checking the fuel system, do
not smoke, and make sure there are
no open flames or sparks in the ar-
ea, including pilot lights from water
heaters or furnaces. Gasoline or
gasoline vapors can ignite or ex-
plode, causing severe injury or
property damage.
Tightening torque:
Brake torque rod nut:
23 Nm (2.3 m·kgf, 17 ft·lbf)
Tightening torques:
Drive chain puller locknut:
16 Nm (1.6 m·kgf, 12 ft·lbf)
Axle nut:
105 Nm (10.5 m·kgf, 76 ft·lbf)
U46B13E0.book Page 39 Monday, September 12, 2011 1:30 PM
Vue de la page 74
1 2 ... 70 71 72 73 74 75 76 77 78 79 80 ... 97 98

Commentaires sur ces manuels

Pas de commentaire