Yamaha RX-A800 Manuel du propriétaire télécharger pdf (Page 92)

SETUP

Setting various functions (Setup menu)

En 92

Configuration

Adjusts the output characteristics of the speakers based on

manually set parameters.

Front

Selects the size (sound reproduction capacity) of the front

speakers. J1

Center

Selects the size of the center speakers.

Surround

Selects the size of the surround speakers.

Surround Back

Selects the size of the surround back speakers.

Front Presence

Specify connection of front presence speakers.

In the “Configuration,” you can select the speaker size

characteristic (Large or Small). Select the size (sound

reproduction capacity) that matches your speakers.

When speaker size is set to “Small,” low-frequency components

of the speakers that you configured are produced from the

subwoofer (or from the front speakers if there is no subwoofer).

Woofer diameter

• 6-1/4 in (16 cm) or larger → Large

• 6-1/4 in (16 cm) or smaller → Small

Large Select this for large speakers. The front speakers will

produce all of the front channel frequency

components.

Small (Default) Select this for small speakers. The subwoofer will

produce front channel low-frequency

components. J2

Large Select this when a large center speaker is connected.

Small (Default) Select this when a small center speaker is connected.

None Select this when there is no center speaker. The front

speakers will produce center channel audio.

Large Select this when the surround speakers are large.

Small (Default) Select this when the surround speakers are small.

None Select this when no surround speakers are connected.

The front speakers will produce surround channel

audio signals.

• When set to “None,” no sound is produced from the surround

back speaker even if that speaker is connected.

• When set to “None,” the sound programs will change to Virtual

CINEMA DSP mode.

Largex1 Select when one large surround back speaker is

connected.

Largex2 Select when two large surround back speakers are

connected.

Smallx1 Select when one small surround back speaker is

connected.

Smallx2 (Default) Select when two small surround back speakers are

connected.

None Select this when no surround back speakers are

connected.

• When there are no surround speakers are connected, the setting

will automatically change to “None.”

• You can set surround back audio signals, including from the

playback source, to be mixed down and produced from a single

speaker (6.1-channel layout) or produced from left and right

surround speakers (5.1-channel layout).

Use (Default) Select this when front presence speakers are

connected.

None Select this when front presence speakers are not

connected.

1 : When “Subwoofer” is set to “None,” you can only choose “Large.” If the front

speaker setting is “Small” and you change “Subwoofer” to “None,” it will

automatically change to “Large.”

2 : You can set the low-frequency components of audio signals transmitted from

the front speakers to the subwoofer by using “Bass Cross Over.”

1 2 ... 87 88 89 90 91 92 93 94 95 96 97 ... 140 141

Commentaires sur ces manuels

Pas de commentaire

Yamaha RX-A800 Manuel du propriétaire Page 92

Commentaires sur ces manuels

Produits connexes et manuels pour Récepteurs AV Yamaha RX-A800