Yamaha HTR-5630RDS Manuel du propriétaire télécharger pdf (Page 47)

English

ADVANCED

OPERATION

Using the test tone

Use the test tone to set speaker levels so that the volume

from each speaker is identical when heard from your

listening position.

1 Press TEST.

The unit will output a test tone.

2 Press u / d repeatedly to select a speaker

to adjust.

Each time you press d, the unit will cycle through

the speakers in the following order:

TEST LEFT (main L)→TEST CENTER (center)→

TEST RIGHT (main R)→TEST R SUR. (rear R)→

TEST L SUR. (rear L)→TEST SUBWOOFER

(subwoofer)→.....

(Press u to cycle the speakers in the reverse order.)

3 Press –/+ to adjust speaker volumes.

4 Press TEST when you have completed your

adjustment.

The test tone halts.

Notes

• You cannot enter test mode if headphones are connected to the

PHONES jack. Remove the headphones from the PHONES

jack.

• You cannot adjust speaker volumes if the “SOUND 1

SPEAKER SET” parameter on the set menu is set to NON.

• You cannot adjust the subwoofer level if the “1D BASS”

parameter in “SOUND 1 SPEAKER SET” in the set menu is

set to MAIN.

• If you select “BASIC 1 SETUP” in the set menu and then

select “SET”, speaker levels change in response to any

changes you make in “BASIC 1 SETUP”.

• Depending on the source the unit is reproducing, the speaker

levels set with the test tone may not be to your liking. If this is

the case, adjust the speaker levels while listening to the

source.

SETTING THE SPEAKER LEVELS

Adjusting the volume during

playback

You can adjust the volume of the speakers while listening

to sound playback.

1 Press LEVEL repeatedly to select the

speaker you want to adjust.

The unit cycles through the speakers in the following

order each time you press LEVEL:

MAIN L→CENTER→MAIN R→

R SUR. (rear R)→L SUR. (rear L)→

SWFR (subwoofer)→.....

• Pressing LEVEL once opens the level display. Press u / d at

this time to select a speaker.

2 Press –/+ to adjust the speaker volume.

• The center and rear speakers can be adjusted by a

maximum of –10dB ~ +10dB.

• The main speakers and subwoofer can be adjusted

by a maximum of –20dB ~ 0dB.

Notes

• You cannot adjust speaker levels if the “SOUND 1 SPEAKER

SET” parameter in the set menu is set to NON.

• You cannot adjust the subwoofer level if the “1D BASS”

parameter in “SOUND 1 SPEAKER SET” in the set menu is

set to MAIN.

• If you use LEVEL to adjust speaker levels, the speaker levels

you previously set with the test tone will also change.

• If you select “BASIC 1 SETUP” in the set menu and then

select “SET”, speaker levels change in response to any

changes you make in ”BASIC 1 SETUP”.

PROG PROG

LEVEL

SET MENU

MUTE

VOLUME

TEST

PROG PROG

STEREO

LEVEL

SET MENU

MUTE

VOLUME

1,4

09V340G_40-45_EN(03.3.4)a.p65 03.4.14, 11:51 AM45

1 2 ... 42 43 44 45 46 47 48 49 50 51 52 ... 385 386

Commentaires sur ces manuels

Pas de commentaire

Yamaha HTR-5630RDS Manuel du propriétaire Page 47

Commentaires sur ces manuels

Produits connexes et manuels pour Récepteurs AV Yamaha HTR-5630RDS