Yamaha S90 Manuel du propriétaire télécharger pdf (Page 39)

S90 XS/S70 XS Owner’s Manual

Using a Connected Computer

Setting up for Remote Control

NOTE Before making the setup of DAW Remote, make sure to install

the USB-MIDI Driver and the S90 XS/S70 XS Remote Tools

correctly.

1 Connect this instrument to the computer via

a USB cable (page 36).

2 Press the [DAW REMOTE] button to enter the

Remote mode.

3 Press the [UTILITY] button to call up the

Remote display of the Utility mode.

4 Set the “DAW Select” to the desired DAW.

5 Press the [STORE] button to store this

setting.

6 Start the DAW software on the computer

connected to this instrument.

This section explains how to set up after starting each

application.

NOTE When the cable between the S90 XS/S70 XS and the Windows

computer is disconnected or the S90 XS/S70 XS is turned off

accidentally, the DAW will not recognize the S90 XS/S70 XS

again even if you connect the cable again or turn the S90 XS/S70

XS on. If this occurs, exit the DAW software, then restart it after

setting up the S90 XS/S70 XS and making sure the connection is

secure.

Cubase

The settings will be completed by installing S90 XS/S70

XS Remote Tools.

SONAR

1 Pull down the [Options] menu and select [MIDI

Devices] to call up the “MIDI Devices” window.

2 Add “Yamaha S90 XS (S70 XS)-2” to the Input Device,

then add “Yamaha S90 XS (S70 XS)-2” to the Output

Device.

3 Pull down the [Options] menu and select [Control

Surfaces] to call up the Control Surface window.

4 Click the [+] button, select “Mackie Control,” then set

the Input Port to “Yamaha S90 XS (S70 XS)-2” and set

the Output Port to “Yamaha S90 XS (S70 XS)-2.”

Digital Performer

1 In the Audio/MIDI setup of a Macintosh computer,

connect Port 2 of the interface of the S90 XS/S70 XS

to Port 2 of the tone generator. When there is only one

Port for the tone generator, add the new Port, then

connect it to the interface.

2 Pull down the [Setup] menu and select [Control

Surfaces] to call up the Control Surface window.

3 Click the [+] button.

4 Select “Mackie Control” in the Driver section.

5 In the box for setting “Unit” and “MIDI,” select “Mackie

Control” in the “Unit” section and select “S90 XS (S70

XS) New Port 2” in the “MIDI” section.

Logic Pro

1 Select the [Preference] menu  [Control Surfaces] 

[Settings] to call up the Settings window.

2 Select the [New] menu  [Install].

3 Select “Mackie Control” in the model, then add it as a

control surface.

4 Set the MIDI Output Port to “Yamaha S90 XS (S70

XS)-2.”

5 Set the MIDI Input Port to “Yamaha S90 XS (S70 XS)-

2.”

NOTE Mackie Control is the trademark of Mackie Designs, Inc.

NOTE For details about the button operations and functions, refer to the

separate PDF manual.

Setting up the S90 XS/S70 XS

Setting up the DAW of the computer

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 63 64

Commentaires sur ces manuels

Pas de commentaire

Yamaha S90 Manuel du propriétaire Page 39

Commentaires sur ces manuels

Produits connexes et manuels pour Synthétiseur Yamaha S90