Yamaha CLP-625 Manuel du propriétaire télécharger pdf (Page 32)

Keyboard Stand Assembly

CLP-625 Owner’s Manual

6-1 Insert the pedal cord plug to the pedal

connector from the rear.

6-2 Securely wind the cord holder around the

pedal cord.

The cord holder is attached to D.

6-3 Connect one end of the power cord to the

AC adaptor.

6-4 Insert the DC plug of the AC adaptor into

the DC IN jack.

7. Set the adjuster.

Rotate the adjuster until it comes in firm contact

with the floor surface.

8. Attach the headphone hanger.

Use two thin screws (4 x 10 mm) to attach the

hanger as shown in the illustration.

When connecting the pedal

cord, insert the plug securely

until the metal part

disappears from view.

After completing the assembly, please check the

following.

• Are there any parts left over?

 Review the assembly procedure and correct any

errors.

• Is this instrument clear of doors and other

movable fixtures?

 Move the instrument to an appropriate location.

• Does this instrument make a rattling noise when

you shake it?

 Tighten all screws.

• Does the pedal box rattle or give way when you

step on the pedals?

 Turn the adjuster so that it is set firmly against the

floor.

• Are the pedal cord plug and the adaptor plug

inserted securely into the sockets?

 Check the connection.

CAUTION

When moving the instrument, always hold the bottom of

the main unit. Do not hold the key cover or top portion.

Improper handling can result in damage to the

instrument or personal injury.

Transporting

If you move to another location, you can transport the

instrument along with other belongings. You can move the

unit as it is (assembled), or you can disassemble the unit

down to the condition it was in when you first took it out of

the box. Transport the keyboard horizontally. Do not lean

it up against a wall or stand it up on its side. Do not subject

the instrument to excessive vibration or shock. When

transporting the assembled instrument, make sure all

screws are properly tightened and have not been loosened

by moving the instrument.

CAUTION

If the main unit creaks or is otherwise unsteady when

you play on the keyboard, refer to the assembly

diagrams and retighten all screws.

Do not hold here.

Hold here.

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 38 39

Commentaires sur ces manuels

Pas de commentaire

Yamaha CLP-625 Manuel du propriétaire Page 32

Commentaires sur ces manuels

Produits connexes et manuels pour Équipement musical supplémentaire Yamaha CLP-625