Yamaha NS-WSW160 Manuel du propriétaire Page 63
- Page / 80
- Table des matières
- DEPANNAGE
- MARQUE LIVRES
Noté. / 5. Basé sur avis des utilisateurs
Setup menu
63 En
PREPARATION PLAYBACK SETTINGS
TROUBLESHOOTING
APPENDIX
Adjust this unit’s dynamic range.
Selectable items: Max*, Standard, Min/Auto
Max: Outputs sound without adjusting the dynamic range of the
input signals.
4)
Standard: The dynamic range recommended for regular home
use.
Min/Auto:
Min: Sets dynamic range at a level that supports comfortable
listening at low volumes.
Auto: Sets dynamic range in accordance with information
received from input signal.
Adjust Dolby Pro Logic IIx Music surround decoder parameters.
Sub menu: Center Width
The greater the value, the broader the sound to the left and right.
Smaller values restrict sound to the center.
Adjustable range: 0 to 7 (default: 3)
Sub menu: Panorama
When this is set to “ON”, sounds from the front left and right
channels are routed to the left and right for a surround, panoramic
effect.
Selectable item: OFF*, ON
Sub menu: Dimension
This setting adjusts the difference in levels between the front and
surround channels. The greater the value, the higher the volume
from the front channel. The smaller the value, the higher the
volume from the surround channels.
Adjustable range: -3 to +3 (default: 0)
Use to configure the settings related to HDMI signals and the
HDMI control function.
Turn HDMI control (☞p. 30) on or off.
Selectable item: OFF*, ON
“OFF”: Disable the control function. The standby power
consumption of this unit decreases.
“ON”: Enable the control function.
Use to select a component to play back HDMI audio signals. This
setting is effective when “HDMI CONTROL” is set to “OFF”.
5)
Selectable item: AMP*, TV
“AMP”: Play back the input sound signal.
“TV”: Plays audio content from the TV connected to the HDMI
OUT (ARC) jack.
If your TV is not ARC compatible (or if the ARC feature has
been disabled), TV audio is input via the INPUT DIGITAL TV
(OPTICAL) jack (default). This unit's input source can be
changed to the AUX INPUT DIGITAL (COAXIAL) jack.
6)
Selectable item: OPTICAL*, COAXIAL
DYNAMIC RANGE
Dolby PLIIx PARAMETER
3)
HDMI setup
HDMI CONTROL
HDMI AUDIO OUT
TV INPUT
Dynamic range describes the difference between minimum and
maximum volume.
“Adaptive DRC” is automatically set to “OFF” when the settings other
than “Max” is selected.
HDMI video signals input to one of the HDMI IN jacks of this unit are
always output from the HDMI OUT (ARC) jack of this unit.
If this unit’s input source is switched to “COAXIAL”, audio is input
from the device (TV) connected to the AUX INPUT DIGITAL jack on
this unit when the TV key is pressed. Audio is input from the device
connected to the INPUT DIGITAL TV jack on this unit when the AUX
key is pressed.
3) y
4) y
5) y
6) y
- Owner’s Manual 1
- Audio/video device 2
- Preparation 2
- Connections/Basic settings 2
- Playback 2
- Contents 4
- Controls and functions 5
- Center unit rear panel (back) 6
- Subwoofer rear panel (back) 7
- 12 3 45 6 8
- Installation 11
- Repeater function) 12
- Installing this unit 14
- PREPARATION PLAYBACK SETTINGS 15
- TROUBLESHOOTING 15
- APPENDIX 15
- Preparing remote control 16
- (ARC) to this unit (☞p. 18) 17
- HDMI cable (optional) 18
- Optical cable (supplied) 18
- 1 Satellite/cable TV tuner 19
- 2 Game console 19
- 3 Game console 19
- 4 Satellite/cable TV tuner 19
- 5 Game console 19
- Initial settings 21
- Confirm the following cases 22
- Auto setup for appropriate 23
- AUTO SETUP via setup menu 26
- Error messages 27
- Loading settings 29
- Registering HDMI compatible 31
- Playback features 32
- STEREO BM STEREO 33
- SURROUND 34
- CINEMA DSP options 35
- Objective/ 37
- Number of channels 37
- Setting the surround decoder 38
- TARGET L16 39
- Using useful features 40
- Disabling the Eco function 41
- Press the ECO key 41
- Press the INFO key 41
- YSP-4300 42
- FM 98.1 44
- FM 88.9 44
- MONO 45
- AUTO PRESE 45
- P01< 87.5 46
- P06< 87.5 46
- C01: 87.5 47
- Connecting an iPod 48
- Browse screen 50
- Playback screen 50
- OFF 51
- ONE 51
- Using the remote control 52
- Charging the iPod 53
- Connecting a USB device 54
- Setup menu 58
- Setup menu list 59
- BEAM settings 60
- IMAGE LOCATION 61
- CHANNEL OUT 61
- SOUND settings 62
- HDMI setup 63
- GROUP ID 64
- DISPLAY settings 65
- INFORMATION settings 65
- Advanced setup 66
- 4) y 5) y 67
- Troubleshooting 68
- FM tuner (YSP-4300 only) 70
- USB device (YSP-4300 only) 70
- Remote control 70
- Messages 71
- Glossary 72
- Specifications 74
- Available signal information 76
- YE830B0/EN1 80
Produits connexes et manuels pour Subwoofers Yamaha NS-WSW160
Subwoofers Yamaha YST-SW305 Spécifications
(44 pages)
(44 pages)
Subwoofers Yamaha YST-SW315 Manuel
(142 pages)
(142 pages)
(22 pages)
Subwoofers Yamaha NS-P70 Manuel de service
(122 pages)
(122 pages)
(23 pages)© 2020, manymanuals.fr. Tous droits réservés | 1.442 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Commentaires sur ces manuels