Yamaha mLAN Patchbay Manuel du propriétaire télécharger pdf (Page 25)

This section describes how to connect or disconnect audio or MIDI connectors between nodes, and

change wordclock and other mLAN connection settings.

You can easily change the audio, MIDI or wordclock signal routing in an mLAN network by intuitively

re-patching the cables in the graphic user interface.

Wordclock Settings

There are two ways to set the wordclock:

•Follow the steps described in “Connecting the Node Input and Outputs” (page 27) to connect

the wordclock connectors one by one.

•Use the [Single Master] option.

This section explains how to use the [Single Master] option.

You can easily set up the wordclock by using the [Single Master] option. You do not need to connect the

wordclock connectors one by one. Typically, you will use this option to specify the wordclock master in

an mLAN network.

• If you wish to specify two wordclock masters in an mLAN network and

connect the wordclock connectors manually, follow the steps described in the

“Connecting the Node Input and Outputs” section (page 27).

• Most functions selected from the Menu bar can also be accessed from the Tool

bar.

1. In the [Connection] menu, select [Wordclock].

The Wordclock Setup window opens.

2. Move the mouse to select the node you wish to assign as wordclock master.

The selected node is highlighted by a solid black frame.

3. In the [Connection] menu, select [Single Master].

mLAN Connection Settings

NOTE

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 42 43

Pas de commentaire

Yamaha mLAN Patchbay Manuel du propriétaire Page 25