Yamaha CRX-B370 Manuel du propriétaire télécharger pdf (Page 13)

En 13

Preparations

Connect speakers, the antenna, etc. and turn the unit on.

Do not connect the power cord of the unit until you have finished connecting all cables.

Connecting speakers

1 Remove the insulation from the ends

of the speaker cables to expose the

bare wires.

2 Connect speakers to the unit, as the

illustration shows.

• Prepare speakers, subwoofer and speaker cables

separately.

• See documentation provided with the speakers

for more information.

Caution

• If the bare speaker wires touch each other or any metal part of the unit, it could damage the unit and/or the speakers.

• Use speakers of at least 6 Ω impedance.

Note

• Make sure that left and right (L, R) connections and polarity (red: +, black: -) are correct. If connections are incorrect, the sound will

be unnatural.

• You can also connect a subwoofer to the unit (it must have a built-in amplifier).

15 mm (5/8 in.)

SUBWOOFER

OUT

Right speaker

Left speaker

Subwoofer

Monaural pin cable

Speaker cable

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 255 256

Pas de commentaire

Yamaha CRX-B370 Manuel du propriétaire Page 13