Yamaha RX-V665 Manuel Page 64
- Page / 96
- Table des matières
- DEPANNAGE
- MARQUE LIVRES
Noté. / 5. Basé sur avis des utilisateurs
60 En
In the advanced setup, you can set basic operations of this
unit, such as on and off of a bi-amp connection, or
initialize user settings. Perform the following steps to
change settings.
1 Set this unit to the standby mode.
2 Press AMAIN ZONE ON/OFF while
pressing and holding MSTRAIGHT on the
front panel.
The advanced setup menu appears on the front panel
display.
3 Press LPROGRAM l / h repeatedly to
select the parameter you want to change.
The default setting are marked with “*.”
y
• Set values are placed in XXX of the following parameters on an
actual display screen.
SP IMP. -XXX
Selects output impedance of this unit according to
connected speakers.
REMOTE ID -XXX
Sets a remote control ID. When using multiple
Yamaha AV receivers, you can operate them with a
single remote control by setting the receiver IDs to
the same setting.
SR PIN -XXX
Resets Parental lock cord when using SIRIUS
Satellite tuner.
BI AMP - XXX
Switches on and off of bi-amp connection of main
speakers. For bi-amp connection, see page 12.
SCENE IR -XXX
Selects whether or not to transmit the control signals
to an external component connected to the REMOTE
jacks on this unit when BD/DVD or CD SCENE
function is selected.
MON.CHK - XXXX
Adds upscaling limitation on output signals to a video
monitor connected to this unit via the HDMI OUT
jack.
INIT-XXXXXXXXX
Initializes various settings stored in this unit. You can
select an initialization method from the following.
DSP PARAM: All parameters of sound field
programs
VIDEO: Video conversion settings (resolution/
aspect) in the setup menu and the OSD
display position
ALL: Reset this unit to initial factory
settings
CANCEL: Cancellation of initialization
4 Press MSTRAIGHT a few times to select the
value you want to change.
The value selected here becomes effective when this
unit is turned on the next time. You can change
multiple settings by repeating steps 3 and 4.
5 Press AMAIN ZONE ON/OFF, turns off this
system, and press AMAIN ZONE ON/OFF
again.
The value set in step 3 becomes effective, and this
unit turns on. When you select initialization in step 3,
the initialization is performed.
Two IDs are provided for the remote control of this unit. If
another Yamaha amplifier is in the same room, setting a
different remote control ID to this unit prevents unwanted
operation of the other amplifier.
ID1 is set for both remote control and amplifier by default.
When you change the remote control ID, display
“Advance Setup” (see the previous section) and change the
ID for the amplifier too.
1 Press dCODE SET on the remote control
using a pointed object such as the tip of a
ballpoint pen.
cTRANSMIT blinks twice.
2 Press mSETUP on the remote control.
3 Enter the desired remote control ID code.
To switch to ID1:
Enter “5019” using tNumeric keys.
To switch to ID2:
Enter “5020” using tNumeric keys.
Once the remote control code is registered,
cTRANSMIT blinks twice.
If it fails, cTRANSMIT blinks six times. Repeat
from step 1.
y
• Initializing the remote control code (see page 59) returns it to ID1.
Advanced setup
Choices: 6ΩMIN/8ΩMIN*
Choices: ID1*/ID2
Choices: RESET/CANCEL
Choices: ON/OFF*
Choices: ON*/OFF
Choices: YES*/SKIP
ADVANCEDSETUP
Choices: DSP PARAM/VIDEO/ALL/CANCEL
Setting a remote control ID
- AV Receiver 1
- IMPORTANT SAFETY INSTRUCTIONS 3
- Caution-ii En 4
- Contents 5
- INTRODUCTION 6
- About this manual 7
- Supplied accessories 7
- Part names and functions 8
- Rear panel 9
- Front panel display 10
- Remote control 11
- Quick start guide 12
- PREPARATION 13
- Connections 14
- Connecting speakers 15
- Connecting the speaker cable 16
- R) components 17
- TV, or projector 18
- Digital output 18
- (optical) 18
- Connecting other components 19
- MULTI CH INPUT 20
- Connecting the power cable 22
- Turning this unit on and off 22
- Subwoofer 23
- Optimizer microphone 23
- BASIC OPERATION 26
- Straight 28
- For movie/TV program sources 29
- Program name 29
- Sound field program category 29
- For audio music sources 30
- For stereo reproduction 30
- The Compressed Music Enhancer 31
- Surround decode mode 31
- FM92.5MHz 33
- Auto Preset 33
- 01:FM87.5MHz 33
- 01:FM92.5MHz 34
- (sold separately) 35
- 001Preview 36
- 00880's 36
- P01:---<<008 37
- 008 80's 37
- Back to “Channel” 38
- 184Weather 39
- 001Hits1 40
- P01:---<<001 41
- 001 Hits 1 41
- Setting the Parental Lock 42
- Radio™ information 43
- Using iPod™ 44
- Shuffle/repeat playback 45
- Using Bluetooth™ components 46
- ADVANCED OPERATION 47
- Signal Info parameters 48
- Video;;;;HDMI1 49
- Sound field program 50
- Sound field parameters 50
- Set values 50
- CINEMA DSP basic parameters 50
- Dialog Lift 51
- Decoder parameters 53
- ;SpeakerSetup 55
- LFE/Bass Out 56
- Front SP 56
- Center SP 56
- Sur. L/R SP 56
- Sur.B L/R SP 56
- Sound Setup 57
- Function Setup 58
- 2 Display 59
- 3 Volume 59
- 4 Input Rename 59
- DSP Parameter 60
- Memory Guard 60
- Connecting Zone2 61
- Controlling Zone2 62
- Setting remote control codes 63
- ADVANCEDSETUP 64
- APPENDIX 65
- Troubleshooting 66
- Tuner (FM/AM) 68
- Bluetooth™ 72
- Before Auto Setup 73
- During Auto Setup 73
- After Auto Setup 74
- Glossary 75
- Information on HDMI™ 78
- Specifications 79
- List of remote control codes 82
- Blu-ray Disc 88
- DVD Recorder 88
- Sattelite 89
- Printed in China WQ95310 92
- ■ Front panel 93
- Printed in China 94
- RX-V665/RX-V565/RX-V465 95
- RX-V665/V565/V465 96
Produits connexes et manuels pour Récepteurs AV Yamaha RX-V665
(58 pages)
Récepteurs AV Yamaha HTR-5940 Manuel
(111 pages)
(111 pages)
Récepteurs AV Yamaha A-S201 Manuel
(34 pages)
(34 pages)
Récepteurs AV Yamaha HTR-5860 Manuel
(103 pages)
(103 pages)
(18 pages)© 2020, manymanuals.fr. Tous droits réservés | 4.510 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Commentaires sur ces manuels