Yamaha RX-V471 Manuel du propriétaire Page 61

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 108
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 60
En 61
Setup menu list
Menu Item Description Page
Speaker
Configuration
Front Selects the size of the front speakers. 62
Center Selects the size of the center speaker and whether or not to use the speaker. 62
Surround Selects the size of the surround speakers and whether or not to use the speakers. 62
Subwoofer
Phase Selects the phase of the subwoofer signals. 62
Bass Cross Over Sets the lower limit of the low-frequency component produced from speakers set to “Small.” 62
Extra Bass Selects the speaker to produce the front channel low-frequency components. 63
Distance Separately adjusts the distance between each speaker and the listening position respectively. 63
Level Separately adjusts the volume of each speaker. 63
Equalizer Selects an equalizer type. 63
Test Tone Turns the test tone generator on or off. 64
Sound
Lipsync Adjusts the delay between audio and video output. 64
Dynamic Range Selects the dynamic range adjustment method for the audio bit stream (Dolby Digital and DTS) signal playback. 65
Max Volume Specify the maximum volume level that can be adjusted by VOLUME on the remote control. 65
Initial Volume Sets the initial volume for when the unit is turned on. 65
DSP
CINEMA DSP 3D Enables/disables CINEMA DSP 3D. 65
Program Selects and adjusts a sound program and a decoder. 66
Function
Input Rename Changes the input source name. 68
Auto Power Down Selects the amount of time after no operation is done that the unit enters standby. 68
Dimmer Reduces the brightness of the front display. 68
Short Message Turns the short messages displayed on the TV screen on or off. 68
Memory Guard Prohibits setting changes to prevent careless changes being made to the settings of the “Setup” menu, YPAO, and SCENE. 69
HDMI
HDMI Control
TV Audio Input Selects the input source that receives audio signals from a TV. 70
ARC Turns the Audio Return Channel function (ARC) on or off. 70
Standby Sync Selects the interlocked operation of the unit when the TV is turned off. 70
SCENE Selects whether or not to interlock an external device connected to this unit when selecting the appropriate SCENE. 70
Audio Output Specifies where audio signal is output. 70
Standby Through Specifies whether or not to transmit HDMI audio/video to the TV during standby mode. 71
Language Selects the language used for menus and messages output from the unit and displayed on the TV screen. 71
Vue de la page 60
1 2 ... 56 57 58 59 60 61 62 63 64 65 66 ... 107 108

Commentaires sur ces manuels

Pas de commentaire