Yamaha RX-V1073 Manuel du propriétaire Page 106

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 147
  • Table des matières
  • DEPANNAGE
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 105
CONFIGURATIONS Configuring various functions (Setup menu) En 106
Multi Zone
Configures the multi zone settings.
Main Zone Set
Configures the main zone setting.
Zone Rename
Changes the zone name (for main zone) displayed on the front display or TV screen.
Procedure
1
Press ENTER to enter the name edit screen.
2
Use the cursor keys and ENTER to rename and select “ENTER” to confirm the entry.
To clear the entry, select “CLEAR”.
3
Use the cursor keys to select “OK” and press ENTER.
To restore the default setting, select “RESET”.
4
To exit from the menu, press ON SCREEN.
Zone2 Set
Configures the Zone2 settings.
Volume
Enables/disables volume adjustments for Zone2 output.
If you have connected an external amplifier with volume control to the unit, disable
volume adjustments for Zone2.
Settings
This setting is not available when “Power Amp Assign” (p.97) is set to “7ch +1ZONE.
Max Volume
Sets the Zone2 maximum volume to prevent excessive loudness.
Setting range
-30.0 dB to +15.0 dB (5.0 dB increments), +16.5 dB
Default
+16.5 dB
This setting is available only when “Volume” is set to “Variable”.
Initial Volume
Sets the Zone2 initial volume for when the unit is turned on.
Settings
This setting is available only when “Volume” is set to “Variable”.
Fixed Disables volume adjustments for Zone2 output.
Variable (default) Enables volume adjustments for Zone2 output.
Off (default)
Sets the level at the volume level of the unit when it last entered standby
mode.
On
Sets at Mute or the specified volume level (-80 dB to +16.5 dB, 0.5 dB
increments).
(This setting works only when the initial volume is set lower than “Max Volume”.)
Vue de la page 105
1 2 ... 101 102 103 104 105 106 107 108 109 110 111 ... 146 147

Commentaires sur ces manuels

Pas de commentaire