Yamaha v4 Manuel du propriétaire Page 27
- Page / 67
- Table des matières
- DEPANNAGE
- MARQUE LIVRES
Noté. / 5. Basé sur avis des utilisateurs
Comparing two settings
Owner’s Manual
27
NOTE
• Be aware that if you copy other settings before you paste,
the buffer memory will be overwritten.
• You can select only one channel or rack as the
copy-source. If multiple channels are selected in the 8
ch/ALL popup window, the COPY button will be
unavailable.
4. Select the paste-destination channel or rack.
NOTE
If you are pasting EQ/dynamics settings, you can use the
8ch or ALL popup window to select multiple channels as
the paste-destination. In this case, the same content will be
pasted to all selected channels.
5. Press the PASTE button.
The settings of the channel (EQ/dynamics) or the rack
(GEQ/effect/Premium Rack) you selected in step 2
will be pasted.
NOTE
• Be aware that when you paste, the settings will overwrite
the paste-destination.
• If nothing has been stored in the buffer memory, the PASTE
button cannot be pressed.
• Of the two types of GEQ, using the tool buttons in a rack in
which a Flex15GEQ is selected will cause the settings to
be copied/pasted for rack A and B individually.
• You cannot paste effect settings that use effect types
“HQ.Pitch” or “Freeze” to racks 2, 4, 6 or 8.
Comparing two settings
You can use the COMPARE button to exchange the settings
held in the buffer memory with the settings of the
currently-selected channel (EQ/dynamics) or rack
(GEQ/effect/Premium Rack). This is convenient if you
want to temporarily keep the settings at a certain point, and
compare them later with subsequently edited settings.
1. Open a popup window that provides the tool
buttons.
2. Select a channel (EQ/dynamics) or rack
(GEQ/effect/Premium Rack).
3. Press the COPY button to place the current
settings in the buffer memory.
This will be the first set of settings.
NOTE
Be aware that if you copy other settings before you
compare, the buffer memory will be overwritten.
4. Edit the settings of the currently-selected
channel (EQ/dynamics) or rack
(GEQ/effect/Premium Rack).
This will be the second set of settings.
NOTE
After you store the first set of settings in the buffer memory,
you can initialize the channel or rack and edit the second
set of settings from an initialized state if desired.
5. To compare the first set of settings with the
current settings (the second set), press the
COMPARE button.
You will return to the first set of settings. At this time,
the second set of settings will be held in the buffer
memory.
6. You can press the COMPARE button
repeatedly to compare the first and second
sets of settings.
Each time you press the COMPARE button, the
current settings will be exchanged with the settings
held in the buffer memory. Unlike the Paste operation,
the Compare operation always lets you return to the
previous settings as long as the buffer memory has not
been overwritten.
NOTE
• The settings in the buffer memory can also be used for the
Paste operation.
• Of the two types of GEQ, using the tool buttons in a rack in
which a Flex15GEQ is selected will cause the settings to
be replaced with the buffer memory data for rack A and B
individually.
COPY
COMPARE
The first set The first set
Buffer memory
Edit the settings
(The second set)
The first set
The first set
The second set
Buffer memory
Buffer memory
- Owner’s Manual 1
- Contents 2
- IMPORTANT SAFETY 3
- INSTRUCTIONS 3
- PRÉCAUTIONS CONCER 3
- NANT LA SÉCURITÉ 3
- FCC INFORMATION (U.S.A.) 4
- PRECAUTIONS 5
- Information 6
- Introduction 7
- An overview of the 8
- CL series 8
- About the models 9
- Controls and functions 10
- Channel Strip section 11
- SELECTED CHANNEL section 12
- Display section 13
- Centralogic section 13
- SCENE MEMORY/MONITOR section 14
- USER DEFINED KNOBS 14
- USER DEFINED KEYS 14
- Master section 15
- USB connector 15
- Meter section (for CL5 only) 15
- 21 3 4 5 16
- 876 A90 C D FEB 16
- Touch screen 18
- List windows 19
- Keyboard window 19
- Popup windows 19
- Dialog boxes 19
- Viewing the touch screen 20
- Entering names 21
- 1 2 3 4 5 22
- Using libraries 23
- 1 CURRENT TYPE 24
- 3 RECALL button 25
- 1 STORE button 25
- Initializing settings 26
- Copying/pasting settings 26
- Comparing two settings 27
- Basic operation of 28
- Using the top panel 29
- (Channel Strip section) 29
- 1 ON FADER switch button 30
- Connections 31
- About redundant networks 32
- Audio input/output 33
- Installing an option card 34
- Owner’s Manual 35
- Word clock connections and 36
- Making HA (Head Amp) 37
- Sending an input channel 38
- TO STEREO/MONO field 39
- Quick Guide 40
- Setting the input channels 41
- Applying EQ/dynamics 42
- Setting the output channels 42
- Using GEQ 42
- Applying effects 43
- Changing the patch settings 45
- Grouping and linking 46
- Setting a custom fader bank 47
- Using talkback 47
- Routing the oscillator to an 48
- Using scene memories 48
- Recording and playing audio 49
- Saving and loading the unit 50
- Other functions 51
- Adjusting the faders 52
- (Calibration function) 52
- Troubleshooting 53
- Installing the 55
- MBCL meter 55
- Specifications 56
- Input/output characteristics 57
- Pin Assignment 58
- Dimensions 59
- Block Diagram 63
- [PHONES] 64
- [2TR RECORDER] 64
- Level Diagram 65
Produits connexes et manuels pour Mélangeurs audio Yamaha v4
(2 pages)
Mélangeurs audio Yamaha MG8 Manuel
(28 pages)
(28 pages)
© 2020, manymanuals.fr. Tous droits réservés | 0.632 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Commentaires sur ces manuels