Yamaha R-N500 Manuel d'utilisateur télécharger pdf (Page 2)

Firmware Update Procedure for R-N500

STEP 5 Press SELECT/ENTER repeatedly to select “NETWORK”

STEP 6 Press DISPLAY to start the update.

(One screen shot during update process.)

Update is completed when “UPDATE SUCCESS”, “PLEASE…”, “POWER OFF!” is

displayed alternately. Then, power off the unit.

note:

DO NOT interrupt the power or press any buttons during the update.

In case the power is accidentally cut off, the R-N500 will restore original firmware. Perform the

update procedure from STEP 1 again.

STEP 7 Confirm updated firmware version

Retry from STEP 2 to enter “ADVANCED MODE”. Rotate SELECT/ENTER to select firmware

version. Confirm that the firmware version has been updated.

(X.XX shows actual firmware version.)

Congratulations!

You have completed the firmware update. Your R-N500 is ready for normal use.

[ 2. Firmware Update by USB ]

Requirements:

・ USB thumb drive, with enough free space to store the firmware.

（File system with FAT16 or FAT32 format）

・ Firmware file provided by Yamaha.

.XX

1 2 3 4

Pas de commentaire

Yamaha R-N500 Manuel d'utilisateur Page 2