Yamaha S30 Manuel du propriétaire télécharger pdf (Page 29)

ADDITIONAL INFORMATION

■ Disc playback

Problem Cause Solution

A disc cannot be inserted into

this unit

This unit is not turned on. Turn on this unit and insert the disc after “NO

DISC” appears on the front panel display.

This unit is in the initialization process. Wait for a while and insert the disc after “NO

DISC” appears on the front panel display.

This unit is not ready for disc loading. Wait for a while and insert the disc after “NO

DISC” appears on the front panel display.

Another disc is already inserted into this

unit.

Eject the disc from this unit, and then insert the

disc you want to play back after “NO DISC”

appears on the front panel display.

You may be trying to reload the ejected disc

by pushing it.

Press or

, or remove the disc from the disc

loading slot fully and then insert it once again.

Some button operations do not

work

Some discs do not support certain functions.

Playback does not start or

stops immediately when

pressing

The disc may be dirty. Wipe the disc clean.

The disc loaded into this unit may be not

compatible.

Make sure you use a disc supported by this unit.

(page iii)

When moved this unit from a cold place to

warm one, condensation may be form on the

disc reading lens.

Wait for one to two hours, then try again.

An audio or subtitle language

does not switch

The disc may not support the multi-language

feature.

Make sure you use a disc that supports the

multi-language feature.

No subtitles appear

The subtitle may be set to “OFF”. Select a subtitle language you want to display.

(page 15)

The disc may not contain subtitle data. Make sure you use a disc with subtitle data.

When using the A-B Repeat feature

(page 12), the subtitle may not appear at the

parts other than the selected section.

Cancel the A-B Repeat feature. (page 12)

A viewing angle does not

switch

The disc may not support the multi-angle

feature.

Make sure you use a disc that supports the

multi-angle feature.

DVD videos cannot be copied

with the VCR

You may be trying to copy a copy-protected

DVD.

Most commercially available DVDs include

copy protect features. You cannot make a copy

of these DVDs.

Picture looks poor

In some cases, picture may look poor while

fast forwarding or reversing, but this is not a

defect.

The TV (monitor) does not show

the picture properly

In the Setup menu, “TV SYSTEM” does not

match the specifications of your TV.

Carry out the procedure “Step 2: Setting the TV

color system”. (page 8)

The progressive scan mode may be used with

a TV that does not support it.

Disable the progressive scan mode. (page 23)

The screen size of the TV or

monitor looks strange

(the image is distorted or the

subtitle is missing)

“TV DISPLAY” in the Setup menu or the

setting of your TV does not match the size of

your TV.

Change “TV DISPLAY” in the Setup menu

(page 23) or the setting of your TV.

When the progressive scan mode is activated,

image with a 4:3 aspect ratio are played on a

16:9 wide television screen.

Change “TV DISPLAY” in the Setup menu.

(page 23)

If you cannot adjust the ratio, turn off the

progressive scan mode. (page 23)

The TV shows overlapped

picture partly

The disc content does not match the

progressive scan mode due to the editing

method or other conditions.

Disable the progressive scan mode. (page 23)

The disc is ejected without an

operation

The disc loaded into this unit may be not

compatible.

Make sure you use a disc supported by this unit.

(page iii)

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 35

Commentaires sur ces manuels

Pas de commentaire

Yamaha S30 Manuel du propriétaire Page 29

Commentaires sur ces manuels

Produits connexes et manuels pour Synthétiseur Yamaha S30