Yamaha QL5 Manuel télécharger pdf (Page 170)

Recorder

Reference Manual

170

RECORDER screen (when selecting the USB tab)

In this screen you can assign signals to the input and output of the USB memory recorder,

and perform recording and playback operations.

1 RECORDER INPUT L/R buttons

Press these buttons to open the CH SELECT window, in which you can select the signals

patched to the recorder’s L/R input channels.

2 RECORDER INPUT GAIN knob

Sets the level of the signal input to the recorder.

3 RECORDER INPUT CUE button

When this button is turned on, you can monitor the signal input to the recorder.

NOTE

You cannot turn on this button and the PLAYBACK OUTPUT CUE button simultaneously.

4 Meters

Indicate the level of the signals input to the recorder.

5 PLAYBACK OUTPUT L/R buttons

Press these buttons to open the CH SELECT window, in which you can select the signals

patched to the recorder’s L/R output channels for playback.

6 PLAYBACK OUTPUT GAIN knob

Sets the level of the signal output to the recorder.

7 PLAYBACK OUTPUT CUE button

Press this button to monitor the signal output from the recorder.

NOTE

You cannot turn on this button and the RECORDER INPUT CUE button simultaneously.

8 Meters

Indicate the level of the signals output to the recorder.

CH SELECT window

Display this window by pressing the RECORDER INPUT L or R button or the PLAYBACK

OUTPUT L or R button.

1 Category List

Enables you to select the type of channel.

2 Channel select button

Select the channels that will be patched to the USB memory recorder’s inputs and

outputs. The channels that can be patched at input or output are different.

Channels that can be patched to the recorder’s inputs

• MIX 1–16.................... MIX channels 1–16

• MTRX 1–8.................. MATRIX channels 1–8

• ST L/R........................ STEREO channel L/R

• ST L+C....................... STEREO channel L mixed with the MONO(C) channel

• ST R+C ...................... STEREO channel R mixed with the MONO(C) channel

• MONO........................ MONO channel

• CH1–64 (QL5), CH1–32 (QL1)

............................. Direct output of an INPUT channel 1–64 (QL5) or INPUT

channel 1–32 (QL1)

• INPUT ........................ INPUT1–32 (QL1: INPUT1–16)

• SLOT1 IN ................... SLOT1(1)–SLOT1(16)

• SLOT2 IN ................... SLOT2(1)–SLOT2(16)

• DANTE1–32............... DANTE1–DANTE32

• DANTE33–64............. DANTE33–DANTE64 (QL5 only)

1 2 3 4 8765

1 2 ... 165 166 167 168 169 170 171 172 173 174 175 ... 293 294

Commentaires sur ces manuels

Pas de commentaire

Yamaha QL5 Manuel Page 170

Commentaires sur ces manuels

Produits connexes et manuels pour Logiciel Yamaha QL5