Yamaha RX-V659 Manuel télécharger pdf (Page 9)

CONTROLS AND FUNCTIONS

INTRODUCTION

8 MEMORY (MAN’L/AUTO FM)

Stores a preset station in the memory. Hold down this

button for more than 3 seconds to start automatic preset

tuning (see page 54).

9 TUNING MODE (AUTO/MAN’L)

Switches between automatic tuning (the AUTO indicator

is turned on) and manual tuning (the AUTO indicator is

turned off) (see page 52).

0 ZONE 2 ON/OFF

Turns on Zone 2 or sets it to the standby mode

(see page 106).

This button is operational only when MASTER ON/OFF is

pressed inward to the ON position.

A ZONE CONTROL

Switches the zone you want to control between the main

zone and Zone 2 (see page 106).

When Zone 2 is selected, the ZONE2 indicator flashes in the front

panel display for approximately 5 seconds. While the indicator is

flashing, perform the desired operation.

B VOLUME

Controls the output level of all audio channels.

This does not affect the AUDIO OUT (REC) level.

C PHONES (SILENT CINEMA) jack

Outputs audio signals for private listening with

headphones (see page 40).

• When you connect headphones, no signals are output at the

speaker terminals.

• All Dolby Digital and DTS audio signals are mixed down to the

left and right headphone channels.

D SPEAKERS A/B

Turns on or off the set of front speakers connected to the

FRONT A and/or B terminals on the rear panel each time

the corresponding button is pressed.

E PRESET/TUNING, EDIT

• Switches the function of PRESET/TUNING/CH l /

h between selecting preset station numbers and

selecting the tuning frequency.

• Edits the assignments of preset stations (see page 57).

F STRAIGHT (EFFECT)

Turns the sound field programs off or on. When the

“STRAIGHT” mode is selected, 2-channel or multi-

channel input signals are output directly from their

respective speakers without effect processing (see

page 45).

G FM/AM

Switches the reception band between FM and AM when

“TUNER” is selected as the input source (see page 52).

H PROGRAM selector

Selects sound field programs or adjusts the bass/treble

balance in conjunction with TONE CONTROL (see

page 39).

I TONE CONTROL

Adjusts the bass/treble balance of the front left and right,

center, presence left and right and subwoofer channels in

conjunction with the PROGRAM selector

(see page 39).

J INPUT MODE

Selects either digital or analog input signals exclusively or

sets this unit to automatically detect the type of input

signals and select the corresponding input signals when

one component is connected via both digital and analog

connections (see page 41).

K INPUT selector

Selects the desired input source.

L MULTI CH INPUT

Selects the component connected to the MULTI CH

INPUT jacks as the input source (see page 44).

The input source connected to the MULTI CH INPUT jacks takes

priority over the source selected with the INPUT selector on the

front panel (or the input selector buttons on the remote control).

M PURE DIRECT

Turns on or off the Pure Direct mode (see page 45).

N VIDEO AUX jacks

Input audio and video signals from a portable external

source such as a game console or a video camera

(see page 27).

To reproduce the source signals input at these jacks, select

“V-AUX” as the input source.

The audio signals input at the DOCK terminal on the rear panel

take priority over the ones input at the VIDEO AUX jacks.

Note

Notes

Note

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 131 132

Commentaires sur ces manuels

Pas de commentaire

Yamaha RX-V659 Manuel Page 9

Commentaires sur ces manuels

Produits connexes et manuels pour Récepteur Yamaha RX-V659