Yamaha PSR-E243 Manuel du propriétaire télécharger pdf (Page 11)

PSR-E243/YPT-240 Owner’s Manual

Setting Up

 Setting the battery type

After installing new batteries and turning the power

on, make sure to set the Battery Type appropriately

(rechargeable or not) via Function number 025 (page

25).

Using the music rest

Connecting Headphones or

External Audio Equipment

Any pair of stereo headphones with a 1/4” stereo

phone plug can be plugged in here for convenient

monitoring. The speakers are automatically shut off

when a plug is inserted into this jack.

The PHONES/OUTPUT jack also functions as an

external output. You can connect the PHONES/OUT-

PUT jack to a keyboard amplifier, stereo system,

mixer, tape recorder, or other line-level audio device

to send the instrument’s output signal to that device.

Connecting a Footswitch to the

SUSTAIN jack

You can produce a natural sustain as you play by

pressing an optional Footswitch plugged into the

[SUSTAIN] jack.

Turning the Power On/Off

Turn down the [MASTER VOLUME] control to

“MIN” then press the [ ] (Standby/On) switch to

turn on the power. While playing the keyboard, adjust

the [MASTER VOLUME] control. To turn off the

power, press the [ ] (Standby/On) switch again for

a second.

While playing the keyboard, use the [MASTER VOL-

UME]

control

to adjust the volume to an appropriate

level.

• Failure to set the Battery Type may shorten the amount of

the battery life. Make sure to set the Battery Type correctly.

• Do not use the instrument/device or headphones for a long

period of time at a high or uncomfortable volume level,

since this can cause permanent hearing loss. If you experi-

ence any hearing loss or ringing in the ears, consult a phy-

sician.

• Before connecting the instrument to other electronic com-

ponents, set all volume levels to the minimum, then turn

off the power for all components.

NOTICE

Insert the music rest

into the slots as shown.

CAUTION

• When the instrument’s sound is output to an external

device, first turn on the power to the instrument, then to

the external device. Reverse this order when you turn the

power off.

• Make sure that the footswitch plug is properly connected to

the SUSTAIN jack before turning on the power.

• Do not press the footswitch while turning the power on. Doing

this changes the recognized polarity of the footswitch, result-

ing in reversed footswitch operation.

• When using a power adaptor, even when the power is off, a

small amount of electricity is still being consumed by the

instrument. When you are not using the instrument for a

long time, make sure to unplug the AC power adaptor from

the wall AC outlet.

NOTICE

NOTE

CAUTION

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 43 44

Commentaires sur ces manuels

Pas de commentaire

Yamaha PSR-E243 Manuel du propriétaire Page 11

Commentaires sur ces manuels

Produits connexes et manuels pour Claviers MIDI Yamaha PSR-E243