Yamaha V2 Manuel télécharger pdf (Page 10)

CONTENTS

Improved screen encoder operation

10 RIVAGE PM series V2.5 Supplemental Manual

You can now use the screen encoders to edit EQ and dynamics parameters on the SELECTED

CHANNEL VIEW screen.

The encoder numbers displayed on the screen correspond to the actual screen encoder numbers.

In SENDS ON FADER mode, the channel on/off status is now indicated in the channel name display

area on the panel.

HY SLOT4 (HY SLOT3 on the CSD-R7) now supports input/output patches.

Due to this improvement, output channels are now patched via the OUTPUT tab, not on the

RECORDING tab.

When you modify input patches, you can now select TAKE FROM PORT or TAKE FROM

CHANNEL. If you select TAKE FROM PORT, the HA parameter settings retained by the patched

port will be used as is. If you select TAKE FROM CHANNEL, the HA parameter settings retained by

the input channel will be copied to the destination port.

INPUT patch screen

Improved screen encoder operation

Improved channel name display

EQ Dynamics

ch 1

CH 1 -∞

ch 1

CH 1 -∞

Channel on Channel off

During channel mute, the

channel name will be

highlighted in the same way

as when the channel is off,

but it will also be flashing.

Improved HY SLOT4 feature

Addition input patch setting

1 2 ... 5 6 7 8 9 10 11 12 13 14

Pas de commentaire

Yamaha V2 Manuel Page 10