Yamaha M7CL Guide de l'utilisateur télécharger pdf (Page 6)

Yamaha Professional Audio M7CL StageMix V5.1 User Guide

Page 6

3.0 Getting Started

3.1 M7CL Network Setup

Connect the Wi-Fi access point to the M7CL console’s network port via a

CAT5 cable. Note that a cross-over cable will be needed with older access

points that don’t have the “auto MDIX” function. Most recent devices will

support “auto MDIX”, in which case a straight CAT5 cable can be used.

Make sure your Ethernet cable is connected to a LAN port on your Wi-Fi

device and not the WAN port.

Note the IP address and MAC address of the M7CL console - they will need to

be entered into the iPad later. They can be found in the console as follows:

a. Press the [SETUP] button on the M7CL touchscreen

b. Press [NETWORK] on the M7CL touchscreen

3.2 iPad Wi-Fi Settings

The iPad can be configured using either DHCP or a Static IP address.

3.2.1 Using DHCP

Dynamic Host Configuration Protocol (DHCP) is a network protocol that

enables a server to automatically assign an IP address to a device.

Use the following steps to configure your iPad using DHCP.

a) Open the iPad “Settings” menu

b) Select “Wi-Fi”, and choose the correct network

c) Press the blue circle with the white arrow to the right of the selected

network to edit the IP address.

1 2 3 4 5 6 7 8 9 10 11 ... 50 51

Pas de commentaire

Yamaha M7CL Guide de l'utilisateur Page 6