Yamaha CDX-397MK2 Manuel du propriétaire télécharger pdf (Page 13)

English

Normal illumination

Slightly dim

Dim

Notes

● When the automatic spacing function is in effect, the display of

the total time and of the total remaining time includes each

interval of the 4 seconds between tracks.

● When the automatic spacing function is in effect during the

playback, “AUTO SPC 4” (the remaining seconds of the

interval) appears and is counted down each time blinking at the

interval between the tracks.

You can change brightness of the display

in three degrees by pressing DIMMER.

If you record a disc onto tape with an insufficient time space between tracks, the tape deck will not be able to perform blank

search operations on the tape correctly. To enable a track search operation, use this function to add an interval of about 4

seconds between tracks.

Changing brightness of the display

DIMMER

SPACE

Automatic spacing

Press SPACE to light up the current setting.

Light up about 3 seconds.

While the current setting is lit up, press SPACE to

change the setting between “AUTO SPACE ON” and

“AUTO SPACE OFF”.

Adjusting the output level

You can adjust the level of signals output to the amplifier by

pressing

OUTPUT LEVEL +/–

OUTPUT

LEVEL

Note

While playing back an MP3/WMA disc, the level of the audio

signal sent to the DIGITAL OUT (OPTICAL) terminal is fixed at

maximum regardless of the displayed volume level.

01En_02_BOD_CDX-397MK2_G.p65 1/23/07, 13:4111

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 25 26

Pas de commentaire

Yamaha CDX-397MK2 Manuel du propriétaire Page 13