Yamaha CDR-HD1000 Manuel du propriétaire Page 67
- Page / 70
- Table des matières
- DEPANNAGE
- MARQUE LIVRES
Noté. / 5. Basé sur avis des utilisateurs
E-63
ADDITIONAL
INFORMATION
English
Display Messages
Can’t Copy
This message is displayed for approximately 3 seconds when digital
recording or copying is not possible according to the SCMS
standard.
See “Rules of Digital Recording” on page 11.
Can’t Edit
This message is displayed when a prohibited editing operation has
been attempted.
Change Discs!
This message informs that a CD needs to be changed to a disc to be
used for duplicating when copying from a CD onto the HDD has
been completed.
Check Disc
The disc loaded is not compatible with this unit, or some kind of
error has occurred during operation. Check the disc, and exchange
the disc if necessary.
Data Track
This message is displayed when the data track is being played.
Disc Full
This message is displayed when recording to a CD-R or CD-RW
disc cannot be performed any further because the recording has
been made up to the total recordable time.
Disc No.Full
When the number of discs recorded on the HDD has reached its
maximum of 999 discs, this message is displayed if more discs have
been attempted to be added.
Erasing
Erasing a CD-RW disc is being performed. The erasing progress is
indicated by the level meter.
Finalize OK?
This message confirms starting finalization of a disc. If you wish to
finalize the disc, press w/d (w on the remote control).
Finalizing
Finalization is being performed. The finalization progress is
indicated by the level meter.
HDD Full
This message is displayed when recording to the HDD cannot be
performed any further because the recording has been made up to
the total recordable time.
New Disc
The disc in the disc tray is either a new CD-R or CD-RW disc, or a
CD-RW disc that has been erased by using a Disc Erase or All
Erase.
No data
There are no tracks (data) recorded on the HDD.
No Enough Spc
There is not enough space for copying, or the track number exceeds
the maximum number, or the total recorded time of the disc exceeds
its maximum length when the recording to HDD is performed in the
multi-synchronized or all-synchronized recording mode.
OTHERS
No Previous
When making “Track Adjust” on the TRACK EDITING menu,
there is no track before the track to be adjusted.
No Source
When copying from the HDD onto a CD-R or CD-RW disc, there is
no source recorded on the HDD to be used for copying.
Not Audio
A non-audio disc or a disc for PCs has been loaded in the disc tray,
and recording has been attempted on that disc.
No Undo Data
Undo is not possible.
OPC Adjust
This message is displayed while OPC (Optimum Power
Calibration) optimized the laser power to the reflectivity of the disc.
Approximately 15 seconds may be required to complete this
automatic adjustment. However, this time length may change
according to the type of the disc that has been loaded.
Pack Before
One disc on the HDD can contain up to 99 tracks. This is displayed
when recording is attempted on the disc that has reached the
maximum number.
“Pack” means to eliminate the unused numbers that have been
created by Edit or Digital Move and not been used to create the
available space for further recording.
Reading
This unit reads the format of the disc loaded on the disc tray.
Approximately 10 to 15 seconds may be required to complete the
reading. However, this time length may change according to the
type of the disc that has been loaded.
Standby
This message is displayed for several seconds after REC has been
pressed to record on a CD-R or CD-RW disc.
TEXT Save?
This message is displayed when the disc tray has been attempted to
be opened without performing the finalization after copying the
data including the titles (disc title, track title, and album title) to a
CD-R or CD-RW disc.
Track No.Full
One disc can contain up to 99 tracks. Recording is attempted on the
disc that has reached the maximum number.
Unrecordable
In recording or copying onto a CD-R or CD-RW disc, the disc
cannot be used for recording or copying. Or in recording or copying
onto the HDD, no space is available.
Wait
This message flashes while this unit is writing information to the
PMA (Program Memory Area) after a is pressed in recording onto
a CD-R or CD-RW disc.
- CDR-HD1000 1
- IMPORTANT SAFETY INSTRUCTIONS 2
- Features 5
- Contents 5
- Introduction 5
- FOR CONSUMER 6
- FOR CONSUMER USE 6
- FOR MUSIC USE ONLY 6
- PREPARATION 7
- Supplied Accessories 8
- Connections 10
- CONTROLS AND FUNCTIONS 11
- Front Panel 11
- Remote Control 12
- 8888888888888 13
- Display Information 14
- Rules of Digital Recording 15
- Notes on System 15
- Usable Recording Media 17
- RECORDING AND COPYING 17
- BASIC RECORDING OPERATION 18
- New Disc 19
- Selecting an Input Source 21
- Adjusting the Recording Level 21
- R CDR–HD1000 22
- Finalization 23
- Setting the Recording Mode 24
- ADVANCED RECORDING OPERATION 24
- Manual Track Marking 25
- BASIC COPYING OPERATION 26
- HDD π CD-RW 27
- 003 1π 1 000 27
- 003 1π 1 001 27
- HDD “ CD-RW 29
- 003 1“ 1 000 29
- 003 1“ 1 001 29
- OPC Adjust 29
- Duplication of a CD 30
- 1 5 4, 6 2 31
- ADVANCED COPYING OPERATION 32
- Setting the Copying Mode 32
- Copying Menu Setting 33
- Level 0.0dB 34
- ALBUM EDITING 35
- Edit Stored 36
- Album New 36
- Album Copy 37
- Album Rename 38
- Album Delete 38
- Album Pack 39
- Album Title 39
- Bookmark 40
- TRACK EDITING 41
- Track Rename 42
- Track Adjust 42
- Track Erase 43
- Part Erase 44
- Track Combine 45
- Track Divide 46
- Track Pack 47
- Add Fade In 47
- Add Fade Out 48
- Track Title 49
- Disc Rename 50
- DISC EDITING 50
- Disc Erase 51
- Disc Combine 51
- Disc Divide 52
- Disc Pack 52
- Disc Title 53
- UNDO FUNCTION 54
- ERASING A CD-RW DISC 55
- Playing a CD 56
- BASIC PLAYBACK OPERATION 56
- Playing Tracks on the HDD 56
- Finding the Desired Group 57
- (Group Skip) 57
- Numeric buttons 58
- Setting the Play Style 59
- ADVANCED PLAYBACK OPERATION 59
- Random Play 60
- Single Repeat Play 60
- Full Repeat Play 61
- Intro Play 61
- Album Play 62
- Bookmark Play 62
- Listening with Headphones 62
- HDD Utility 63
- System Utility 64
- ADDITIONAL 65
- INFORMATION 65
- DAC mode 66
- Display Messages 67
- Troubleshooting 68
- Specifications 69
- CLASS 1 LASER PRODUCT 70
- LASER KLASSE 1 PRODUKT 70
- LUOKAN 1 LASERLAITE 70
- KLASS 1 LASER APPART 70
- PRODUIT LASER DE CLASSE 1 70
Produits connexes et manuels pour Lecteurs de CD Yamaha CDR-HD1000
(3 pages)
(1 pages)
(1 pages)
Lecteurs de CD Yamaha CD-N301 Manuel
(302 pages)
(302 pages)
(24 pages)
Lecteurs de CD Yamaha TSX-132 Manuel
(168 pages)
(168 pages)
Lecteurs de CD Yamaha TSX-B232 Manuel
(200 pages)
(200 pages)
Lecteurs de CD Yamaha EMQ-1 Manuel
(53 pages)
(53 pages)
© 2020, manymanuals.fr. Tous droits réservés | 2.972 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Commentaires sur ces manuels