Yamaha YZF-R1 Manuel d'utilisateur télécharger pdf (Page 10)

MXL Plug&Play kit for Yamaha R1 2007/2008/2009 – R6 2006/2007/2008

User manual

Release 1.06

www.aim-sportline.com

Chapter 2 – Plug&Play kit installation

MXL Plug and Play kit for Yamaha R1/R6 is expressly designed and developed to

guarantee the maximum installation ease.

WARNING: this kit has been properly tested to guarantee total compatibility with a

bike entirely according to the stock one sold by the mother house.

Through the fixing points on the back of the logger the stock dash can be easily and quicly

substituted with no need of bending or drilling anything: each component is just

“Plug&Play”.

The system is to be connected to the high beam chassis using the bracket included in the

kit. The bracket is in black anodised aluminium lightweight and mechanically resistant.

GENERAL NOTES – Read these notes before installing the system.

• Do not cut any cable: the wiring supplied with the kit is Plug&Play;

• be careful not to damage the stock connectors while plugging/unplugging them;

• do not install the system when the engine is hot;

• be careful not to lose screws and washers.

2.1 – Installation on Yamaha R1 2007/2008 – R6 2006/2007/2008

Once the stock dash removed:

• fix MXL to the bracket through the four fixing points highlighted in the image here

below;

• connect the wiring to the connectors as explained here below.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 20 21

Pas de commentaire

Yamaha YZF-R1 Manuel d'utilisateur Page 10